Laboratory Autoclaves (Autester / Presoclave)
Saturated-steam laboratory autoclaves from J.P. Selecta: 8–150 L, benchtop 8–28 L to 134 °C / 2.1 bar, vertical 50 / 80 / 150 L — Autester and Presoclave.
View product
Photos available on requestRegulation, Temperature Control and Measurement Devices
Accessories for controlling and measuring laboratory heating: Promat programmer, Sensoterm II contact thermometer, Electemp-B/-TFT regulators, digital and stick thermometers, humidity meter and RS 232 microprinter.
Key specifications
- Electemp-TFT
- temperature readout from -150 to 1300 °C, stability ±0.1 °C, Pt 100 / type K probe
- Tc-9226-A
- digital thermometer, -200 to 1370 °C, 10-measurement memory
- Ht-305E
- temperature 0 to 60 °C, humidity 10 to 95 % RH
- Microprinter
- non-thermal printer, 56 mm paper, RS 232
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Regulation, Temperature Control and Measurement Devices
Request a quoteOverview
Product overview
This group supplies control and measurement accessories. The Promat is an automatic programmer that switches electrical devices on and off from a preselected program with cycles up to 24 hours; the Sensoterm II is a contact thermometer with an independent probe that replaces glass-and-mercury contact thermometers; the Electemp-B regulates heater power by pulses, and the Electemp-TFT reads from -150 to 1300 °C with ±0.1 °C stability.
The Tc-9226-A digital thermometer reads -200 to 1370 °C with memory for 10 readings, the Ht-305E measures temperature and humidity (10-95 % RH), a mercury stick thermometer is listed, and the Microprinter is a 56 mm RS 232 printer for measuring instruments such as pH meters and spectrophotometers. Note: some of these pages are published in Spanish on the English site.
Specifications
Technical specifications
13 parameters
Key specifications
- Electemp-TFT
- temperature readout from -150 to 1300 °C, stability ±0.1 °C, Pt 100 / type K probe
- Tc-9226-A
- digital thermometer, -200 to 1370 °C, 10-measurement memory
- Ht-305E
- temperature 0 to 60 °C, humidity 10 to 95 % RH
- Microprinter
- non-thermal printer, 56 mm paper, RS 232
Range coverage
- Product references in this entry
- 8 references (8 distinct model names)
Models and references
- Promat
- Ref. 1000500
- Sensoterm ll
- Ref. 1001009
- Electemp-B
- Ref. 3000896
- Electemp-TFT
- Ref. 3000897
- Termómetro de varilla amarillo con anillo de suspensión, mercurio
- Ref. 3009200
- Microprinter
- Ref. 4120113
- Ht-305e
- Ref. 5903023
- Tc-9226-a
- Ref. 5903030
Features
Key features
- 01
Promat
Automatic programmer for timed on/off switching up to 24 h cycles.
- 02
Electemp-TFT
Wide-range temperature controller/reader, -150 to 1300 °C.
- 03
Digital thermometer Tc-9226-A
-200 to 1370 °C with 10-measurement memory.
- 04
Microprinter
RS 232 printer with selectable speed for pH meters, conductivity meters and spectrophotometers.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from J.P. Selecta
Laboratory ovens
J.P. Selecta ovens and furnaces: 50+ models — natural +5–200 °C / 19–240 L, forced +5–250 °C (Hightemp 400 °C), vacuum +5–200 °C / 3–47 L, incubators +5–80 °C, muffles to 1100 °C.
View product
Laboratory baths
J.P. Selecta baths: water, oil, ultrasonic, and refrigerated — 2–60 L headline, circulating ±0.1 °C, water to 99.9 °C, oil to 200 °C.
View product
Shakers and stirrers
J.P. Selecta mixing: magnetic 40–1700 rpm to 10 L, heated magnetic 50–1600 rpm / 30–350 °C, orbital 20–250 rpm, vortex 2800 rpm, overhead 60–2000 rpm.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.