Skip to content
Al-Shaker for Scientific and Medical Supplies

Reference: Cintra 6020

GBC Cintra 6020

The Cintra 6020 is a true double-beam spectrometer covering 190-1,200 nm, with very low stray light and noise, suited to routine laboratory work and applications reaching into the NIR.

Key specifications

Photometric system
Double-beam, direct ratio recording
Wavelength range
190-1,200 nm
Spectral bandpass
0.5 to 3.0 in 0.1 nm steps (fixed 1.5 nm slit also available)
Detector
Silicon photodiode
  • Configured to your application by our specialists
  • Installed and commissioned on site
  • Training and after-sales support across Jordan, the GCC and MENA

Overview

Product overview

The Cintra 6020 is available with a fixed 1.5 nm slit or a variable slit from 0.5 to 3.0 nm in 0.1 nm steps. GBC says it challenges many higher-priced UV-Vis and UV-Vis-NIR instruments on wavelength range and stray light.

A full range of accessories is available, including sample changers, autosamplers, Peltier or water thermostatted temperature control, and reflectance spheres capable of measurement up to 1,150 nm.

Specifications

Technical specifications

13 parameters

Optics

Photometric system
Double-beam, direct ratio recording
Wavelength range
190-1,200 nm
Spectral bandpass
0.5 to 3.0 in 0.1 nm steps (fixed 1.5 nm slit also available)
Detector
Silicon photodiode
Scanning speed
5 to 10,000 nm/min

Performance

Stray light @220 nm (10 g/L NaI)
< 0.0001 %T
Stray light @340 nm (50 g/L NaNO2)
< 0.0009 %T
Wavelength accuracy
±0.01 nm
Photometric linearity
< 0.6% @ 3 Abs
Photometric drift
< 0.00012 A/hr
Baseline flatness
< 0.0013 A

Physical

Dimensions (W x D x H)
695 x 640 x 350 mm
Weight
42 kg unpacked; 86 kg packed
Features

Key features

  • 01

    Extended range to 1,200 nm

    Reaches into the NIR region.

  • 02

    Variable or fixed slit

    0.5-3.0 nm variable, or fixed 1.5 nm.

  • 03

    Broad accessory range

    Sample changers, autosamplers, Peltier or water thermostatting, reflectance spheres to 1,150 nm.

From order to operation

We stay with the instrument after it arrives

Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.

  1. 01

    Consult

  2. 02

    Plan

  3. 03

    Supply

  4. 04

    Install

  5. 05

    Train

  6. 06

    Support

Talk to the technical team

Tell us the application. We will specify the system.

Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.