GBC SavantAA
Double-beam AAS from GBC Scientific Equipment: Ebert-Fastie 333 mm, 175–900 nm, 1800 line/mm, 8-lamp turret, Hyper-Pulse background correction.
View product
Reference: System 5000
GBC System 5000
The System 5000 is a complete automated graphite furnace system with a PAL autosampler, power supply and workhead, built for sub-parts-per-billion detection limits.
Key specifications
- Maximum temperature
- 3,000 °C
- Injection volume
- 1 to 100 in 1 µL increments
- Elements determined
- Approximately 50, most at sub-ppb concentrations
- Multiple injections
- Up to 50 repeat deposit/dry/ash cycles for automatic pre-concentration
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
GBC System 5000
Request a quoteOverview
Product overview
The System 5000 packages the graphite furnace workhead, power supply unit and PAL autosampler into one system controlled by the SavantAA software. Around 50 elements can be determined, most at sub-ppb concentrations.
Injection volume is adjustable from 1 to 100 µL, hot injection and variable injection speed suit viscous samples such as oils, and multiple injections can pre-concentrate low-level samples automatically without manual extraction.
Specifications
Technical specifications
5 parameters
Furnace
- Maximum temperature
- 3,000 °C
Autosampler
- Injection volume
- 1 to 100 in 1 µL increments
- Chemical modifiers
- Two dispensed automatically
Performance
- Elements determined
- Approximately 50, most at sub-ppb concentrations
- Multiple injections
- Up to 50 repeat deposit/dry/ash cycles for automatic pre-concentration
Features
Key features
- 01
PAL autosampler
Variable 1-100 µL injection in 1 µL steps.
- 02
Temperature programs to 3,000 °C
Suitable for complex samples.
- 03
Programmable gas selection
Different gases within a single method.
- 04
Automatic chemical modifiers
Two modifiers dispensed automatically.
- 05
Multiple injections
Automatic pre-concentration, up to fifty cycles.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from GBC Scientific Equipment
GBC Quantima
GBC ICP-OES: 11 L/min argon on typical aqueous work, IIS ignition, slurry and high TDS without dilution, organics without an oxygen accessory.
View product
GBC OptiMass 9600
OA-TOF ICP-MS: 27.12 MHz RF at 500–1500 W, argon <12 L/min, 1–260 amu, >30,000 spectra/s, resolution typically ≥1,200 for 238U.
View product
GBC Cintra 4040
True double-beam double-monochromator UV-Vis: 190–900 nm, bandpass 0.1–2.0 nm, scan 5–10,000 nm/min, R928 PMT, linearity <0.3% at 4 Abs.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.