Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
Key specifications
- Range
- +10 to +300 °C
- Stability
- ±0.5 °C (custom ±0.1)
- Capacity
- 5.5–130 kW
- Temperature
- 50–300 °C
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
High-temperature heating circulators
Request a quoteOverview
Product overview
LNEYA’s high-temperature heating circulators cover +10 to +300 °C at ±0.5 °C, with custom stability to ±0.1 °C. Heating capacity is 5.5–130 kW. The UC series on the same page is 50–300 °C with a 7-inch touchscreen.
UC versus the wider +10 to +300 °C heating line, and the custom ±0.1 °C option, stay configurations.
Al-Shaker specifies a heating circulator versus SUNDI when cooling is not required, then installs, trains, and supports the unit across Jordan, the GCC, and MENA.
Specifications
Technical specifications
5 parameters
Temperature
- Range
- +10 to +300 °C
Control
- Stability
- ±0.5 °C (custom ±0.1)
Heating
- Capacity
- 5.5–130 kW
UC series
- Temperature
- 50–300 °C
- Interface
- 7-inch touchscreen
Features
Key features
- 01
+10 to +300 °C
The official high-temperature heating window, heat only — not a SUNDI cool/heat loop.
- 02
±0.5 °C, custom ±0.1 °C
Published stability, with the tighter custom figure LNEYA lists.
- 03
UC 7-inch touchscreen
UC series 50–300 °C and 5.5–130 kW heating on this line.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
LT2 Cooling Circulator (-25 to 30 °C)
Recirculating chiller series reaching -25 °C with ±0.5 °C accuracy and 1.5 to 5 kW of cooling capacity at -15 °C, in air- or water-cooled versions.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.