Reference: BH-200D-2

Cole-Parmer BH-200D-2 Digital Dry Block Heater

Digital dry block heater for two single-width blocks or one double-width block, controlling up to 130 °C with ±0.1 °C uniformity at 37 °C.

Key specifications

Number Of Blocks: 2
Control Type: Digital; 130°C
Uniformity: ±0.1°C at 37°C; ±1°C at 130°C (within block)
Max Temperature: 130 °C

Configured to your application by our specialists
Installed and commissioned on site
Training and after-sales support across Jordan, the GCC and MENA

Cole-Parmer BH-200D-2 Digital Dry Block Heater

Overview

Product overview

The BH-200D-2 is a digital dry block heater for incubating and heating test tubes, microcentrifuge tubes, cuvettes and microtitre plates without a water bath. Formerly sold as the Stuart SBH130D, it accepts two single-width aluminium blocks or one double-width flexi block.

The large thermal mass of the aluminium blocks gives stable, accurate temperatures. Digital control reaches 130 °C, with block uniformity of ±0.1 °C at 37 °C and ±1 °C at 130 °C.

A hot warning light shows when the block is above 50 °C. Heating blocks are chosen to suit the tubes in use and are ordered separately from a wide range of inserts.

Specifications

Technical specifications

8 parameters

Number Of Blocks: 2
Control Type: Digital; 130°C
Uniformity: ±0.1°C at 37°C; ±1°C at 130°C (within block)
Max Temperature: 130 °C
Supply voltage: 230 V AC
Power consumption: 300 W
Block Type: Digital Dry Block Heater
Warranty: 3 years

Features

Key features

01
Digital control to 130 °C
Set and read the block temperature digitally.
02
Two-block capacity
Two single-width blocks or one double-width flexi block.
03
High uniformity
±0.1 °C at 37 °C within the block.
04
Hot warning light
Indicates when the block is above 50 °C.
05
Wide block choice
Inserts for tubes, vials, cuvettes and plates, sold separately.