
Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
A 278 L upright biomedical freezer controlling from -10°C to -25°C, with an independent inner door, seven drawers, R290 refrigerant and audible and visual alarms.
Key specifications
LF25-280W -25°C Upright Biomedical Freezer
Request a quoteOverview
The LF25-280W is a vertical biomedical freezer with a 278 L capacity and a microprocessor-controlled temperature range of -10°C to -25°C at ambient temperatures from 10 to 32°C. An NTC sensor and LED digital display provide clear, stable control, and the unit can run at its lowest temperature for long periods.
An independent inner door reduces cold air loss when the outer door is opened, and seven drawers organise samples. Insulation is high-density CFC-free urethane foam, and the cooling system uses environmentally safe R290 refrigerant with manual defrost. The upright side door has a built-in handle and a hinge limit to prevent collisions, and lockable casters allow the freezer to be moved.
Alarms cover high and low temperature, sensor error, power off, controller malfunction and door ajar, with both audible and flashing light indication. A start-delay protects the compressor after power failure, a password protects the settings, and the unit tolerates supply voltages from 187 to 242 V. A test hole of 25 mm and an optional temperature data logger are provided.
Specifications
29 parameters
Upright cabinet with seven drawers and a 480 × 415 × 1460 mm interior.
Microprocessor control with NTC sensor and LED digital display.
Reduces cold air leakage and stabilises internal temperature.
Audible and visual alerts for temperature, sensor, power, controller and door faults.
Start-delay after power failure and wide 187 to 242 V voltage tolerance.
R290 refrigerant with high-density CFC-free foam insulation.
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
Consult
Plan
Supply
Install
Train
Support
Talk to the technical team
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.