
Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Fast cassette steam sterilizer with a 5.2 L chamber, completing an unwrapped cycle in about 9 minutes at up to 138°C.
Key specifications
STC-5000 Cassette Autoclave
Request a quoteOverview
The STC-5000 is a cassette autoclave for rapid, reliable steam sterilization of solid and hollow instruments, including unwrapped loads. A complete unwrapped cycle takes about 9 minutes, which suits multi-department use and emergencies.
The sterilization volume is about 5.2 L, with a 38 × 18 × 7.8 cm chamber and a removable cassette measuring 48 × 19.6 × 8 cm outside. Operating temperature ranges from 115°C to 135°C with a maximum of 138°C, and maximum operating pressure is 242 kPa. A 3.4 L tank supplies ultra-pure, deionized, distilled or purified water, and the unit measures 58 × 46 × 19 cm.
Operation is shown on screen and a cycle can be interrupted safely at any time. A self-detection system stops the unit automatically if a problem occurs and displays a fault code. It runs on AC 220 V, 50 Hz, for up to 6 cycles per hour.
Specifications
10 parameters
An unwrapped sterilization cycle takes about 9 minutes.
Instruments are processed in a 5.2 L cassette that can be carried to the point of use.
Suitable for instruments with cavities as well as solid instruments.
Sterilization procedures can be safely interrupted at any time.
The system stops automatically on a fault and displays an error code.
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
Consult
Plan
Supply
Install
Train
Support
Talk to the technical team
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.