Skip to content
Al-Shaker for Scientific and Medical Supplies

Cooling Biochemical Incubator ICB-B-YB/YL Series

Frost-free refrigerated incubator from 103 to 1022 L, covering 0 to 65 °C (YB) or -10 to 65 °C (YL) for microbial culture, plant work and BOD testing.

Key specifications

ICB-B103YL
ICB-B152YL / ICB-B253YL / ICB-B412YL / ICB-B722YL / ICB-B1022YL
Capacity (L)
ICB-B103YB: 103; ICB-B152YB: 152; ICB-B253YB: 253; ICB-B412YB: 412; ICB-B722YB: 722; ICB-B1022YB: 1022
Circulation Mode
Forced Convection (Balanced Type)
Dimension (W*D*H), Internal (mm)
ICB-B103YB: 480*390*550; ICB-B152YB: 500*460*660; ICB-B253YB: 640*460*860; ICB-B412YB: 560*530*1390; ICB-B722YB: 980*530*1390; ICB-B1022YB: 980*750*1390
  • Configured to your application by our specialists
  • Installed and commissioned on site
  • Training and after-sales support across Jordan, the GCC and MENA

Overview

Product overview

The ICB-B-YB/YL Series is a cooling biochemical incubator for the culture and preservation of bacteria and other microorganisms, plant breeding and seedling experiments, and water quality analysis including BOD determination. Six capacities are available, from 103 to 1022 L, in two temperature versions: YB from 0 to 65 °C and YL from -10 to 65 °C.

A frost-free design avoids the temperature swings of conventional defrost cycles during long experiments. The diffusion-type air duct and a three-speed circulating fan improve uniformity while limiting sample evaporation. Programmable fuzzy PID control with 30 segments and 99 cycles allows gradient and ramp control of temperature, fan speed and run time.

The refrigeration system uses hot gas bypass regulation for safe compressor operation. A wide display, over-temperature protection with audible and visual alarms, USB data recording, chamber lighting and a 40 mm test hole are included.

Specifications

Technical specifications

16 parameters

Specification

ICB-B103YL
ICB-B152YL / ICB-B253YL / ICB-B412YL / ICB-B722YL / ICB-B1022YL
Capacity (L)
ICB-B103YB: 103; ICB-B152YB: 152; ICB-B253YB: 253; ICB-B412YB: 412; ICB-B722YB: 722; ICB-B1022YB: 1022
Circulation Mode
Forced Convection (Balanced Type)
Dimension (W*D*H), Internal (mm)
ICB-B103YB: 480*390*550; ICB-B152YB: 500*460*660; ICB-B253YB: 640*460*860; ICB-B412YB: 560*530*1390; ICB-B722YB: 980*530*1390; ICB-B1022YB: 980*750*1390
Dimension (W*D*H), External (mm)
ICB-B103YB: 645*700*1255; ICB-B152YB: 665*780*1360; ICB-B253YB: 800*780*1570; ICB-B412YB: 1025*810*1735; ICB-B722YB: 1445*810*1735; ICB-B1022YB: 1445*1030*1735
Temperature, Range (℃)
YB Series: 0~65; YL Series: -10~65;
Resolution (℃)
0.1
Fluctuation (℃)
High temperature ±0.3℃, Low temperature ±0.5℃ / High temperature ±0.5℃, Low temperature ±1℃
Uniformity (℃)
±0.5 / ±1
Operating Ambient Temperature (℃)
5-30
Shelves (Standard)
ICB-B103YB: 2; ICB-B152YB: 3; ICB-B253YB: 3; ICB-B412YB: 4; ICB-B722YB: 4; ICB-B1022YB: 4
Test Hole (mm)
φ40
Electricity, Voltage/Frequency
AC 220V, 50Hz
Consumption (W)
ICB-B103YB: 780; ICB-B152YB: 840; ICB-B253YB: 1200; ICB-B412YB: 1500; ICB-B722YB: 2100; ICB-B1022YB: 2550
Safety Protection
Refrigeration System / Compressor overheating, over-current and over-pressure protection; condenser fan overheating protection.
Others
Main power phase sequence and phase loss protection; Leakage and short-circuit protection; Overload protection.
Features

Key features

  • 01

    Six capacities, two ranges

    Models from 103 to 1022 L in the YB (0 to 65 °C) and YL (-10 to 65 °C) versions.

  • 02

    Frost-free operation

    Avoids temperature drift and defrost fluctuations so long-term experiments stay stable.

  • 03

    Three-speed fan

    High, medium and low fan speeds balance uniformity against sample evaporation.

  • 04

    30-segment programming

    Fuzzy PID programs with 30 segments and 99 cycles control temperature ramps, fan speed and time.

  • 05

    USB data recording

    Connect a printer or USB flash drive to log temperature data in real time.

  • 06

    Layered protection

    Over-temperature cut-off with alarms, plus compressor, phase, leakage and overload protection.

From order to operation

We stay with the instrument after it arrives

Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.

  1. 01

    Consult

  2. 02

    Plan

  3. 03

    Supply

  4. 04

    Install

  5. 05

    Train

  6. 06

    Support

Talk to the technical team

Tell us the application. We will specify the system.

Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.