Skip to content
Al-Shaker for Scientific and Medical Supplies

LWP-F5-M Series Deionized Water Purifier

Deionized water purifiers producing 10 to 30 L/h from tap water, with separate RO and deionized water outlets and resistivity of 10 to 16 MΩ·cm.

Key specifications

Feed water request
Tap water, inlet water pressure: 0.15-0.5MPa, water temperature 5-40°C
Capacity
LWP-F5-M10: 10L/H; LWP-F5-M20: 20L/H; LWP-F5-M30: 30L/H
Flow rate
1.5-2L/min ( with pressure barrel)
Output water quality
RO Pure water: desalination rate as high as 95-99%,TDS<10ppm
  • Configured to your application by our specialists
  • Installed and commissioned on site
  • Training and after-sales support across Jordan, the GCC and MENA

Overview

Product overview

The LWP-F5-M series are deionized water purifiers that treat municipal tap water in four stages: a 5 µm PP pre-filter, granular activated carbon, an RO membrane and a deionisation column. Three models produce 10, 20 and 30 L/h (LWP-F5-M10, M20 and M30), dispensing 1.5 to 2 L/min from an external 12 L pressure tank.

Two outlets supply RO water with 95 to 99% salt rejection and TDS below 10 ppm, and deionized water at 10 to 16 MΩ·cm with conductivity of 0.1 µS/cm or less. Online monitoring measures output water quality, and automatic programs handle RO anti-scaling flushing, shutdown when feed water fails and when the tank is full, and automatic tank refilling. Electrical parts and waterways are fully separated to prevent moisture damage.

Korean quick-insert filter cartridges and front and rear access doors allow filter changes without tools. A portable TDS pen is supplied. The system can replace single, double or triple distillation and is used as pre-treatment for ultrapure systems and as feed water for analysers, media and reagent preparation.

Specifications

Technical specifications

9 parameters

Specifications

Feed water request
Tap water, inlet water pressure: 0.15-0.5MPa, water temperature 5-40°C
Capacity
LWP-F5-M10: 10L/H; LWP-F5-M20: 20L/H; LWP-F5-M30: 30L/H
Flow rate
1.5-2L/min ( with pressure barrel)
Output water quality
RO Pure water: desalination rate as high as 95-99%,TDS<10ppm
Deionized water: resistivity 10-16MΩ.cm@25°C, conductivity: ≦0.1 μs/cm, ammonia: 0.3μg/ml, nitrate: 0.06 μg/ml
Deionized water: resistivity 10-16MΩ.cm@25°C, conductivity: ≦0.1 μs/cm, ammonia: 0.3μg/ml, nitrate: 0.06 μg/ml
Power supply
220V/50Hz; 48W
Dimension(mm)
LWP-F5-M10: W*D*H:41*27*50cm; LWP-F5-M30: W*D*H: 41*27*50
Package Dimension (mm)
LWP-F5-M10: W*D*H : 64*56*70cm; LWP-F5-M30: W*D*H: 640*560*690
Standard configuration
Machine (including 1 set of consumable filters) +External 12L pressure tank + accessory package
Features

Key features

  • 01

    Three capacities

    10, 20 and 30 L/h models for different laboratory demand.

  • 02

    Two water outlets

    RO water with TDS below 10 ppm and deionized water at 10 to 16 MΩ·cm.

  • 03

    Four-stage process

    PP pre-filter, activated carbon, RO membrane and deionisation column.

  • 04

    Automatic protection

    RO anti-scaling flushing, low feed and full-tank shutdown, and automatic tank refilling.

  • 05

    Tool-free filter change

    Quick-insert cartridges behind front and rear access doors.

  • 06

    Online quality monitoring

    Continuous measurement of output water quality, with a portable TDS pen supplied.

From order to operation

We stay with the instrument after it arrives

Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.

  1. 01

    Consult

  2. 02

    Plan

  3. 03

    Supply

  4. 04

    Install

  5. 05

    Train

  6. 06

    Support

Talk to the technical team

Tell us the application. We will specify the system.

Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.