Skip to content
Al-Shaker for Scientific and Medical Supplies

Heating Incubator ICB-E Series

Forced-air heating incubator in 50, 80, 160 and 270 L capacities, controlling from ambient +5 to 65 °C for microbial culture and strain storage.

Key specifications

Capacity(L)
ICB-50E: 50; ICB-80E: 80; ICB-160E: 160; ICB-270E: 270
Circulation
Forced air convection
Dimension (W*D*H), Internal (mm)
350*350*410
Dimension (W*D*H), External (mm)
510*520*800
  • Configured to your application by our specialists
  • Installed and commissioned on site
  • Training and after-sales support across Jordan, the GCC and MENA

Overview

Product overview

The ICB-E Series is a forced air convection heating incubator for strain storage, biological culture and general research work in universities, agricultural and life science laboratories. Four models are offered with chamber volumes of 50, 80, 160 and 270 L.

Temperature is held from ambient +5 to 65 °C by a PID controller with a PT100 sensor, with 0.5 °C fluctuation, ±1 °C uniformity and 0.1 °C resolution. The large LCD menu interface supports fixed-value and timed operation from 1 to 9999 min, showing END with a buzzer when a run is complete.

A rear suction fan with side air circulation and perforated, height-adjustable shelves keeps the chamber even. The brushed stainless steel interior, observation window, leakage protector, over-temperature alarm and self-diagnosis display support safe routine use, with optional test holes and an independent temperature limiter.

Specifications

Technical specifications

22 parameters

Specifications

Capacity(L)
ICB-50E: 50; ICB-80E: 80; ICB-160E: 160; ICB-270E: 270
Circulation
Forced air convection
Dimension (W*D*H), Internal (mm)
350*350*410
Dimension (W*D*H), External (mm)
510*520*800
Temperature, Range (℃)
RT+5-65
Fluctuation (℃)
0.5
Resolution (℃)
0.1
Uniformity (℃)
±1
Sensor
PT100
Controller
PID
Display
LCD
Timer(min)
1-9999
Material, Internal
Stainless steel
Material, External
Electro-galvanized steel with antimicrobial powder coating
Shelves
ICB-50E: 2; ICB-80E: 2; ICB-160E: 3; ICB-270E: 3
Test Hole (mm)
Optional φ25,50,80
Safety Device
Leakage protector/Over- temperature alarm
Electricity
Voltage/Frequency (V/Hz) / 220/50 / 220/50 / 220/50 / 220/50
Consumption (W)
ICB-50E: 210; ICB-80E: 280; ICB-160E: 380; ICB-270E: 570
N. W./G.W. (kg)
ICB-50E: 43/50; ICB-80E: 52/55; ICB-160E: 85/95; ICB-270E: 100/110
Shipping Dimension (W*D*H) (mm)
ICB-50E: 670*630*990; ICB-80E: 700*700*1080; ICB-160E: 720*720*1180; ICB-270E: 960*850*1260
Optional
1.Independent temperature limiting controller 2.Intelligent LCD procedure temperature controller(Optional USB,RS485/232 and printer).
Features

Key features

  • 01

    Four chamber sizes

    Models ICB-50E, ICB-80E, ICB-160E and ICB-270E cover 50 to 270 L with two or three adjustable shelves.

  • 02

    PID control with PT100

    Holds ambient +5 to 65 °C with 0.5 °C fluctuation and 0.1 °C display resolution.

  • 03

    Menu-driven LCD

    Large LCD shows live parameters and supports fixed-value or timed runs up to 9999 min with an end-of-run buzzer.

  • 04

    Even air circulation

    A large-impeller fan draws air from the rear and circulates it along both sides through perforated shelves.

  • 05

    Energy-saving sealing

    A synthetic silicone door seal and thickened aluminum silicate insulation reduce heat loss.

  • 06

    Built-in safety

    Leakage protector, sound and light over-temperature alarm and fault self-diagnosis are standard.

From order to operation

We stay with the instrument after it arrives

Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.

  1. 01

    Consult

  2. 02

    Plan

  3. 03

    Supply

  4. 04

    Install

  5. 05

    Train

  6. 06

    Support

Talk to the technical team

Tell us the application. We will specify the system.

Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.