Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: HPLC-2025
HPLC-2025 High Performance Liquid Chromatograph
Modular HPLC system with isocratic, binary or quaternary pumps up to 62 MPa, a 108-vial autosampler and UV detection from 190 to 800 nm.
Key specifications
- Flow Rate Range
- 0.001mL/min~10.000mL/min
- Pump Type
- Isocratic(P1), Binary(P2), Quaternary(P4)
- Maximum Pressure
- 62MPa
- Plunger Rinsing
- Supported
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
HPLC-2025 High Performance Liquid Chromatograph
Request a quoteOverview
Product overview
The HPLC-2025 is a modular high performance liquid chromatograph built for reliability, precision and ease of use. The HPLC-2025P1, P2 and P4 pumps provide isocratic, binary or quaternary delivery from 0.001 to 10.000 mL/min at up to 62 MPa. A reciprocating tandem plunger design with a pressure dynamic suppression algorithm gives precise gradients and retention time repeatability below 0.2%.
The pump cam is machined from high-hardness alloy steel above 55 HRC, with a high-power motor, NSK bearings and a suspended floating plunger that resists seal wear. Online automatic plunger rinsing prevents buffer salt crystallization, and purging is available from both the workstation and the panel. The autosampler holds 108 × 2 mL vials or 96 and 384-well plates, injects 0 to 100 μL in low-loss, microliter pick-up or full-loop modes, and has 0.003% carryover, with optional 4 to 40°C sample cooling.
The column oven reaches up to 85°C, and the detector uses deuterium and tungsten lamps over 190 to 800 nm with ±1 nm wavelength accuracy. Online degassing is optional. The system serves pharmaceutical, food, environmental and research analysis.
Specifications
Technical specifications
35 parameters
Specification
- Flow Rate Range
- 0.001mL/min~10.000mL/min
- Pump Type
- Isocratic(P1), Binary(P2), Quaternary(P4)
- Maximum Pressure
- 62MPa
- Plunger Rinsing
- Supported
- Sample Capacity
- 108, 2mL(96&384 well plates)
- Injection Range
- 0-100μL
- Injection Mode
- Low-loss, microliter carrying, full-loop
- Injection Time
- Minimum to 5 s
- Carryover
- 0.003%
- Degassing Unit
- Online degassing(optional)
- Temperature Control
- 4-40 ℃(optional)
- Operating Principle
- Peltier element and fan-based forced air
- Temperature Range
- 5 ℃ above ambient to 85 ℃ 10 ℃ below ambient to 85 ℃
- Light Source
- Deuterium(transmission type) and Tungsten lamp
- Wavelength Range
- 190-800nm
- Wavelength Accuracy
- +/- 1nm
- Wavelength Precision
- +/- 0.1nm
- Linearity
- >2.5 AU
- Wavelength Calibration
- Mercury lamp
- Light Source
- Deuterium (transmission type) & Tungsten lamp
- Wavelength Range
- 190~800nm
- Slit Width
- 1nm, 2nm, 4nm, 8nm
- Wavelength Accuracy
- +/- 1nm
- Wavelength Precision
- +/- 0.1nm
- Linearity
- > 2.0 AU
- Wavelength Calibration
- Holmium glass
- Light Source
- 150W Xe lamp
- Wavelength Range(Excitation)
- 200 to 850nm Zero order
- Wavelength Range(Emission)
- 250 to 900nm Zero order
- Detection Sensitivity (Raman peak of water S/N)
- S/N ≥ 900 (Baseline method)
- Wavelength Accuracy
- ±3nm
- Wavelength Repeatability
- ±0.5nm
- Noise
- ≤0.05mV(1.0mL/min 100% Methanol, Gain 1.00)
- Drift
- ≤0.3mV/30 min(1.0mL/min 100% Methanol, Gain 1.00)
- Min. Detection Limit
- ≤5.0×10-6 g/mL(500pg)
Features
Key features
- 01
Isocratic, binary or quaternary
P1, P2 and P4 pumps deliver 0.001 to 10.000 mL/min at up to 62 MPa.
- 02
Retention time repeatability
Tandem plunger design and pressure dynamic suppression give under 0.2% repeatability.
- 03
Durable pump mechanics
Hardened alloy cam, NSK bearings and floating plunger extend service life.
- 04
Automatic plunger rinsing
Periodic online rinsing prevents buffer salt crystallization and microbial growth.
- 05
High-capacity autosampler
108 vials or 96/384-well plates, 0 to 100 μL injection and 0.003% carryover.
- 06
190 to 800 nm detection
Deuterium and tungsten lamps with ±1 nm wavelength accuracy.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.