Skip to content
Al-Shaker for Scientific and Medical Supplies

Reference: DIMD-10KM

DIMD-10KM Membrane Degasser for Dissolution Media

Inline membrane degasser that heats, degasses and dispenses dissolution media at 1.6 L/min with ±1% volume accuracy and no volume limit.

Key specifications

Model
DIMD-10KM
Dispensing Volume
No volume limit; setting accuracy: 0.1 L
Volume Dispensing Accuracy
±1% (for volume ≥ 2 L)
Compatible Media
Dissolution media (pH 1–14, surfactant-free)
  • Configured to your application by our specialists
  • Installed and commissioned on site
  • Training and after-sales support across Jordan, the GCC and MENA

Overview

Product overview

The DIMD-10KM is a membrane degasser for rapid deoxygenation, online degassing and dispensing of purified water, distilled water and surfactant-free dissolution media from pH 1 to 14. It handles any volume, from as little as 100 mL, at a processing speed of 1.6 L/min.

Media is preheated inline before degassing, which improves degassing efficiency and shortens the heating wait in the dissolution tester. Heating can be set from 35°C to 42°C with ±2°C accuracy, or switched off. Dispensing volume is set in 0.1 L steps with ±1% accuracy for volumes of 2 L or more, and degassing reaches 3.0 to 5.0 mg/L, upgradeable to 2.8 mg/L or less.

A high-resolution LCD touch interface lets a single operator complete degassing and dispensing alone. Optional 40, 25 or 20 μm wire mesh pre-filters are available, and all internal components can be replaced quickly. Rated power is 1700 W, and inlet media should be at least 18°C.

Specifications

Technical specifications

11 parameters

Specifications

Model
DIMD-10KM
Dispensing Volume
No volume limit; setting accuracy: 0.1 L
Volume Dispensing Accuracy
±1% (for volume ≥ 2 L)
Compatible Media
Dissolution media (pH 1–14, surfactant-free)
Processing Speed
1.6 L/min
Heating Accuracy
±2 ℃
Degassing Performance
3.0 5.0 mg/L (upgradeable to ≤ 2.8 mg/L)
Rated Power
1700 W (customizable for specific cold regions based on ambient temperature)
Inlet Medium Temperature Requirement
≥ 18 ℃
Filter
Optional 40μm / 25μm / 20μm wire‑mesh pre‑filter
External Dimensions (L*W*H)
500*340*295 mm
Features

Key features

  • 01

    Inline preheating

    Media is heated to 35°C to 42°C before degassing for better efficiency.

  • 02

    Accurate dispensing

    Volume set in 0.1 L steps with ±1% accuracy at 2 L and above.

  • 03

    Unlimited volume

    Processes any volume at 1.6 L/min, from as little as 100 mL.

  • 04

    Broad media compatibility

    Purified water, distilled water and surfactant-free media from pH 1 to 14.

  • 05

    Simple touch control

    High-resolution LCD touch interface for single-operator use.

  • 06

    Easy maintenance

    All internal components can be replaced quickly.

From order to operation

We stay with the instrument after it arrives

Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.

  1. 01

    Consult

  2. 02

    Plan

  3. 03

    Supply

  4. 04

    Install

  5. 05

    Train

  6. 06

    Support

Talk to the technical team

Tell us the application. We will specify the system.

Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.