Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: GEP-PH-300
GEP-PH-300 Mini Basic Electrophoresis Power Supply
Compact microcomputer-controlled electrophoresis power supply with 10-300 V output, 4-400 mA current and a 1-999 minute timer.
Key specifications
- Output voltage
- 10-300V (continuously adjustable)
- Error
- 1V
- Output current
- 4-400mA (continuously adjustable)
- Accuracy
- 1ma
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
GEP-PH-300 Mini Basic Electrophoresis Power Supply
Request a quoteOverview
Product overview
The GEP-PH-300 is a compact basic power supply for routine gel electrophoresis. It uses a microcomputer-controlled design that runs stably with low heat output and light weight, and it can switch freely between constant voltage and constant current operation.
Output voltage is continuously adjustable from 10 to 300 V and current from 4 to 400 mA, with a maximum output of 100 W. A timer from 1 to 999 minutes ends runs automatically, and the unit detects and reports common faults. Up to four identical electrophoresis tanks can be connected at once.
The housing is injection-molded from impact, corrosion and aging resistant flame retardant material with silicone rubber keys. It accepts different input voltages and suits horizontal, vertical and blotting transfer electrophoresis.
Specifications
Technical specifications
8 parameters
Specifications
- Output voltage
- 10-300V (continuously adjustable)
- Error
- 1V
- Output current
- 4-400mA (continuously adjustable)
- Accuracy
- 1ma
- Output
- 100W (max)
- Timing
- 1-999min (adjustable)
- Package Dimension (W*D*H) (mm)
- 320*320*220
- G.W.(kg)
- 2
Features
Key features
- 01
Wide adjustable output
Voltage is adjustable from 10 to 300 V and current from 4 to 400 mA, with 1 V and 1 mA precision.
- 02
Constant voltage or current
Users can switch between constant voltage and constant current modes at any time during setup.
- 03
Built-in run timer
A 1 to 999 minute timer stops the run automatically at the set time.
- 04
Fault detection
The power supply automatically detects and reports a range of fault conditions.
- 05
Four tanks at once
Up to four identical electrophoresis tanks can be connected and run simultaneously.
- 06
Durable flame retardant housing
Injection-molded housing resists impact, corrosion and aging, with comfortable silicone rubber keys.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.