
Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
A 24-position nitrogen evaporator that combines software-controlled gas flow, liquid-level tracking needles and a heated sample rack for fast, uniform concentration of small-volume samples.
Key specifications
NEC100-R24M Nitrogen Evaporator / Sample Concentrator
Request a quoteOverview
The NEC100-R24M concentrates high-throughput, small-volume samples by blowing nitrogen onto each vial while the sample rack is heated from room temperature to 100°C. It holds 24 positions and accepts 2 mL and 5 mL centrifuge vials and 2 mL GC vials, and the reserved rack space also suits 1.5 mL vials and 1 to 2 mL QuEChERS tubes.
Gas is distributed over up to 4 channels, each with its own valve, and the flow rate is set in software from 0 to 3.0 L/min in 0.1 L/min steps, independent of how many channels are open. The needles descend at a controlled 0 to 100.0 mm/min to follow the liquid level over a travel of up to 50 mm.
All parameters are set and stored on a built-in 7-inch touch screen. Typical uses include sample preparation for chromatographic analysis and QuEChERS workflows.
Specifications
17 parameters
Nitrogen needles move down at a set speed in manual or auto mode, with up to 50 mm of vertical travel for vials of different heights.
Gas flow is set from 0 to 3.0 L/min in 0.1 L/min steps and stays constant regardless of how many channels are switched on.
Each of the 4 nitrogen channels has its own valve, so unused rows can be closed to save gas.
The rack heats from room temperature to 100°C in 0.1°C steps, and its hollow design lets the operator see the samples.
Temperature, flow and needle speed are set on the built-in screen, and methods can be saved and recalled.
Temperature and pressure alarms cut off the gas flow automatically when a fault is detected.
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
Consult
Plan
Supply
Install
Train
Support
Talk to the technical team
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.