Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: PP-Z400/PH-Z1460
PP-Z400 / PH-Z1460 Peristaltic Pump
Peristaltic pump for precise low-flow dispensing from 0.0063 to 1460 mL/min, with volumes from 15 µL and ±0.5% repeatability.
Key specifications
- RPM
- 0.1-400rpm / Dispensing time / 0.1-999.9S / Using tubing / 13#、14#、19#、16#、25#、17#、18#
- Speed resolution
- 0.1rpm(≤100rpm) 1rpm(＞100rpm) / Dispensing volume / 15μL-9999L / Flow range / 0.0063-1460mL/min
- Filling volume resolution
- 0.001-0.01mL (Different according to the tubing) / Times / 0-9999 (0 Infinite loop) / Tubing wall / 1.6mm / Roller seal / Yes
- Repeat error
- ±0.5% / Intervals / 0.1-999.9s / Pressure adjust / No / Factory pressure / 0.15Mpa
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
PP-Z400 / PH-Z1460 Peristaltic Pump
Request a quoteOverview
Product overview
The PP-Z400 drive combined with the PH-Z1460 pump head is a peristaltic pump suited to fine dosing, running at 0.1 to 400 rpm for flow rates of 0.0063 to 1460 mL/min. It accepts 13#, 14#, 16#, 17#, 18#, 19# and 25# tubing with a 1.6 mm wall, and filling volume resolution is 0.001 to 0.01 mL depending on the tube.
Timed, copy and volume dispensing modes cover volumes from 15 µL to 9999 L, with dispensing times and intervals of 0.1 to 999.9 s, up to 9999 cycles and a suck-back angle adjustable up to 720 degrees. Dual-CPU control and a stepper motor give ±0.5% repeatability that is not affected by load. The 3.5-inch LCD, membrane keypad and control knob handle setup, and RS232, RS485, analog speed inputs, TTL signals and foot switch or sensor control support automation.
The portable unit has a carrying handle and power-off memory, and is used for precise filling in pharmaceutical, food, chemical, biological and environmental laboratories.
Specifications
Technical specifications
13 parameters
Specifications
- RPM
- 0.1-400rpm / Dispensing time / 0.1-999.9S / Using tubing / 13#、14#、19#、16#、25#、17#、18#
- Speed resolution
- 0.1rpm(≤100rpm) 1rpm(＞100rpm) / Dispensing volume / 15μL-9999L / Flow range / 0.0063-1460mL/min
- Filling volume resolution
- 0.001-0.01mL (Different according to the tubing) / Times / 0-9999 (0 Infinite loop) / Tubing wall / 1.6mm / Roller seal / Yes
- Repeat error
- ±0.5% / Intervals / 0.1-999.9s / Pressure adjust / No / Factory pressure / 0.15Mpa
- Retention error
- 100rpm，1% within 68 hours (Filling special tube) / Suction angle / 0-720° / Shell material / PPS
- Display
- LCD screen (3.5 inch) / Protection level / IP31 / Roller material / SS
- Operation
- Membrane keypad +Digital control knob / Power / ≤45W / Roller No. / 4
- Working environment
- Temperature, 0℃ to 40℃ Relative humidity < 80% / Weight / 6.8kg / Product No. / 2021503
- External speed control
- 0-5V (optional)、0-10V (optional)、4-20mA (standard), 0-10K (standard)
- Type of external control
- Start /stop, Direction change TTL 5V (standard), TTL 12V (optional), TTL 24V (optional)
- Port output
- DC12V Power Output; DC5V TTL Output (optional)
- Communication Interface
- RS232, RS485 (Start/stop, Direction change, speed control)
- Power supply
- AC220V±10%, 50Hz/60Hz(standard); AC110V±10%, 50Hz/60Hz; AC380V±10%, 50Hz/60Hz(optional)
Features
Key features
- 01
Low-flow precision
Flow from 0.0063 mL/min with filling resolution down to 0.001 mL.
- 02
Three dispensing modes
Timed, copy and volume dispensing from 15 µL, with up to 9999 cycles.
- 03
Stepper motor drive
High torque and precise speed control unaffected by load changes.
- 04
Adjustable suck-back
Suck-back angle can be set up to 720 degrees to prevent dripping.
- 05
Automation interfaces
RS232, RS485, 4-20 mA and 0-10K speed control, and TTL start/stop and direction signals.
- 06
Portable design
Carrying handle, power-off memory and support for multiple pump heads.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.