Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: PP-Z400/PH-Z1880
PP-Z400 / PH-Z1880 Peristaltic Pump
Stepper-driven peristaltic pump delivering 0.169 to 1880 mL/min at 0.1 to 400 rpm, with timed, copy and volume dispensing and ±0.5% repeatability.
Key specifications
- RPM
- 0.1-400rpm / Dispensing time / 0.1-999.9S / Using tubing / 15#、24#、35#、36#
- Speed resolution
- 0.1rpm(≤100rpm) 1rpm(＞100rpm) / Dispensing volume / 400μL-9999L / Flow range / 0.169-1880mL/min
- Filling volume resolution
- 0.001-0.01mL (Different according to the tubing) / Times / 0-9999 (0 Infinite loop) / Tubing wall / 2.4mm / Roller seal / Yes
- Repeat error
- ±0.5% / Intervals / 0.1-999.9s / Pressure adjust / No / Factory pressure / 0.15Mpa
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
PP-Z400 / PH-Z1880 Peristaltic Pump
Request a quoteOverview
Product overview
The PP-Z400 drive with PH-Z1880 pump head is a peristaltic pump for transfer and dispensing, running at 0.1 to 400 rpm for flow rates of 0.169 to 1880 mL/min with 15#, 24#, 35# and 36# tubing. A dual-CPU design separates drive and control, and one-key filling gives repeatability of ±0.5%.
Three dispensing modes are available: timed, copy and volume dispense, covering 400 µL to 9999 L with dispensing times of 0.1 to 999.9 s and a suck-back angle adjustable up to 720 degrees. Flow can be calibrated, and the pump supports start, stop, reverse and full-speed purge. A 3.5-inch LCD shows all parameters, and external control includes 4-20 mA, 0-10K, TTL start/stop and direction, RS232 and RS485, plus foot switch and sensor inputs.
The housing is PPS, the four rollers are 304 stainless steel and gaskets are PTFE. It suits small and medium dose filling in pharmaceutical, food, chemical, biological, laboratory and environmental applications.
Specifications
Technical specifications
15 parameters
Specifications
- RPM
- 0.1-400rpm / Dispensing time / 0.1-999.9S / Using tubing / 15#、24#、35#、36#
- Speed resolution
- 0.1rpm(≤100rpm) 1rpm(＞100rpm) / Dispensing volume / 400μL-9999L / Flow range / 0.169-1880mL/min
- Filling volume resolution
- 0.001-0.01mL (Different according to the tubing) / Times / 0-9999 (0 Infinite loop) / Tubing wall / 2.4mm / Roller seal / Yes
- Repeat error
- ±0.5% / Intervals / 0.1-999.9s / Pressure adjust / No / Factory pressure / 0.15Mpa
- Retention error
- 100rpm，1% within 68 hours (Filling special tube) / Suction angle / 0-720° / Shell material / PPS
- Display
- LCD screen (3.5 inch) / Protection level / IP31 / Roller material / SS
- Operation
- Membrane keypad +Digital control knob / Power / ≤45W / Roller No. / 4
- Working environment
- Temperature, 0℃ to 40℃ Relative humidity < 80% / Weight / 6.8kg / Product No. / 2022503
- External speed control
- 0-5V (optional)、0-10V (optional)、4-20mA (standard), 0-10K (standard)
- Type of external control
- Start /stop, Direction change TTL 5V (standard), TTL 12V (optional), TTL 24V (optional)
- Port output
- DC12V Power Output; DC5V TTL Output (optional)
- Communication Interface
- RS232, RS485 (Start/stop, Direction change, speed control)
- Power supply
- AC220V±10%, 50Hz/60Hz(standard); AC110V±10%, 50Hz/60Hz; AC380V±10%, 50Hz/60Hz(optional)
- Package Dimension (W*D*H)(mm)
- 390*340*280
- G.W.(kg)
- 8
Features
Key features
- 01
Wide flow range
0.169 to 1880 mL/min at 0.1 to 400 rpm, depending on tubing size.
- 02
Three dispensing modes
Timed, copy and volume dispensing from 400 µL to 9999 L with adjustable suck-back up to 720 degrees.
- 03
Dual-CPU control
Separate drive and control processors give one-key filling with ±0.5% repeatability.
- 04
Remote and automated control
4-20 mA and 0-10K speed control, TTL start/stop and direction, RS232 and RS485 communication.
- 05
Robust materials
PPS housing, 304 stainless steel rollers and PTFE gaskets.
- 06
Power-off memory
Settings are retained after power loss, and a coated circuit board improves interference resistance.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.