Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: PBM-YXMQ
Planetary Ball Mill PBM-YXMQ
Oil-sealed, low-noise planetary ball mill with 2 or 4 stations for dry and wet grinding to below 100 nm, with jars up to 500 mL.
Key specifications
- Model
- PBM-YXMQ
- Type
- Oil-sealed silent type
- Application Fields
- Pharmaceuticals, food, geology, metallurgy, agriculture, glass, ceramics, aviation, chemicals, biology, materials, lithium batteries, electronics, plants, etc.
- Sample Characteristics
- Soft, medium-hard, hard, brittle, fibrous, or viscous materials
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Planetary Ball Mill PBM-YXMQ
Request a quoteOverview
Product overview
The PBM-YXMQ planetary ball mill performs dry and wet fine grinding to a final fineness below 100 nm, and is also used for sample mixing, nano-dispersion, homogenization and mechanical alloying. It suits research institutes and industrial laboratories in geology, metallurgy, building materials, chemicals, pharmaceuticals, environmental protection, lithium batteries and electronics.
The mill takes 2 or 4 grinding stations, with jars of 50, 100, 250 and 500 mL (smaller jars with adapters) and a maximum throughput of 4 x 500 mL. The sun disk runs from 10 to 400 rpm with a 1:2 transmission ratio, giving jar speeds of 20 to 800 r/min. Feed size is below 5 mm, or below 10 mm for soil. Jars are available in stainless steel, agate, zirconium oxide, corundum, tungsten carbide, nylon, polyurethane, PTFE and other materials.
Gear drive with an enclosed oil-bath seal and noise-reduction materials lowers noise and extends service life. Grinding time, interval, direction and speed are programmable, with power-off memory, emergency stop and overload protection.
Specifications
Technical specifications
38 parameters
Specification
- Model
- PBM-YXMQ
- Type
- Oil-sealed silent type
- Application Fields
- Pharmaceuticals, food, geology, metallurgy, agriculture, glass, ceramics, aviation, chemicals, biology, materials, lithium batteries, electronics, plants, etc.
- Sample Characteristics
- Soft, medium-hard, hard, brittle, fibrous, or viscous materials
- Processing Modes
- Pulverizing, grinding, mixing, homogenization, mechanical alloying
- Sun Disk Structure
- Planetary sun wheel with oil-bath gear lubrication for enhanced durability and noise isolation.
- Max. Feed Size (depending on the material)
- < 5mm (Soil < 10mm)
- Final Fineness
- < 100nm
- Max. Sample Throughput
- 4 x 500 ml
- Grinding Jar Options
- 50/100/250/500mL (Adapters required for small jars)
- Max. Filling Level (Sample)
- 160 ml/jar
- Max. Filling Level (Ball)
- 160 ml/jar
- Sun Disk Speed
- 10-400 rpm
- Grinding Jar Speed
- 20-800 r/min
- Total Grinding Speed
- 1200 r/min
- Transmission Ratio
- 1:2 (Sun Disk: Grinding Jar)
- Grinding Jar Materials
- Stainless Steel, agate, zirconium oxide, corundum, tungsten carbide, nylon, polyurethane, PTFE, silicon carbide, etc.
- Grinding Media Materials
- Stainless steel, agate, zirconium oxide, corundum, nylon, PTFE.
- Media Diameters
- 1 / 2 / 3 / 5 / 8 / 10 / 15 / 20 / 25 / 30 mm
- Simultaneous Samples
- Up to 4 types
- Number of Stations
- 2 or 4 grinding stations
- Jar Placement
- Vertical planetary
- Protection Rating
- IP60
- Grinding Mode
- Dry / Wet grinding
- Oil Seal Box Location
- Located at the bottom of the sun disk
- Oil Seal Box Dimensions
- 36*10cm
- Oil Fill Volume
- 220 ml (must be pre-filled before use)
- Sun Disk Diameter
- 360 mm
- Operational Modes
- Program memory, Power-off memory
- Forward/Reverse Operation
- Yes
- Continuous Run Time
- 00:01:00-99:59:59
- Pause Time Setting
- 00:01:00-99:59:59
- Emergency Stop
- Yes
- Power-off Memory
- Yes
- Sound Emission
- < 60 dB (measured within 3 meters)
- Electricity
- 100-120V/200-240V AC, 50-60Hz, 750W
- Dimensions
- 780*580*680mm
- Net Weight
- 100kg
Features
Key features
- 01
Below 100 nm fineness
Dry or wet grinding to nanometer scale, plus mixing and mechanical alloying.
- 02
2 or 4 stations
Throughput up to 4 x 500 mL with jars from 50 to 500 mL.
- 03
Oil-sealed silent drive
Oil-bath gear lubrication and noise-reduction materials for quiet operation.
- 04
Many jar materials
Stainless steel, agate, zirconia, corundum, tungsten carbide, PTFE and more.
- 05
Programmable grinding
Set time, interval, rotation direction and speed with power-off memory.
- 06
Built-in protection
Emergency stop and overload protection for long, high-intensity use.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.