Skip to content
Al-Shaker for Scientific and Medical Supplies

Reference: CON-P20 / CON-P30 / CON-P40

CON-P20, CON-P30 and CON-P40 Pocket Conductivity Testers

Pocket multi-range conductivity testers up to 20.00 mS/cm with ±1% F.S. accuracy, automatic temperature compensation and TDS or salinity modes.

Key specifications

Conductivity
Range / 0~20.00,200.0,2000µS/cm,20.00mS/cm
Resolution
0.01,0.1,1
Accuracy
±1% F.S.
Calibration Points
1 to3 points
  • Configured to your application by our specialists
  • Installed and commissioned on site
  • Training and after-sales support across Jordan, the GCC and MENA

Overview

Product overview

The CON-P series are pocket conductivity testers with four switchable ranges up to 20.00 mS/cm, resolution down to 0.01 μS/cm and accuracy of ±1% of full scale. The CON-P20 measures conductivity and temperature, the CON-P30 adds TDS, and the CON-P40 measures conductivity, TDS, salinity and temperature.

Calibration uses 1 to 3 points with automatic recognition of 84 μS/cm, 1413 μS/cm and 12.88 mS/cm standards. Automatic temperature compensation from 0 to 60°C, with a 2%/°C coefficient referenced to 25°C, keeps readings accurate across the range. TDS reads up to 20.00 ppt with an adjustable factor of 0.1 to 1.0, and salinity reads from 0 to 10.00 ppt.

The Auto-Read function senses and locks a stable endpoint, and the setup menu covers calibration points, TDS factor, temperature unit and auto power off. A reset function restores factory defaults. The dual-line LCD runs on two AAA batteries and switches off 8 minutes after the last key press.

Specifications

Technical specifications

28 parameters

8.CON-P30: Conductivity, TDS, temperature

Conductivity
Range / 0~20.00,200.0,2000µS/cm,20.00mS/cm
Resolution
0.01,0.1,1
Accuracy
±1% F.S.
Calibration Points
1 to3 points
Calibration Solutions
84µS/cm,1413µS/cm,12.88mS/cm
TDS
CON-P20: Range; CON-P30: —; CON-P40: 0-10.00,100.0,1000ppm,20.00ppt
Resolution
— / 0.01,0.1,1
Accuracy
— / ±1%F.S.
TDS Factor
— / 0.1~1.0(default 0.5)
Salinity
Range / — / — / 0.00-10.00ppt
Resolution
CON-P20: —; CON-P30: —; CON-P40: 0.01ppt
Accuracy
CON-P20: 一; CON-P30: —; CON-P40: ±1%F.S.
Temperature
Range / 0-60°C/32~140°F
Resolution
0.1°C/0.1°F
Accuracy
±1°C/±1.8°F
Offset Calibration
1 point, reading ±10°C
Other Specifications
Temperature Compensation / 0~60°C, automatic
Temperature Coefficient
2%/°C
Reference Temperature
25°C
Cell Constant
K=1
Hold Function
Manual or auto-endpoint
Auto-Off
8 minutes after last key pressed
Operating Temperature
0~50°C
Display
Dual-line LCD (21×21mm)
Power Requirements
2×1.5V AAA batteries
Battery Life
Approximately 200 hours of continuous use
Dimensions
185(L)×40(Dia.)mm
Weight
100g
Features

Key features

  • 01

    Multi-range conductivity

    Four ranges from 0 to 20.00 mS/cm with ±1% F.S. accuracy.

  • 02

    Three model options

    CON-P20 for conductivity, CON-P30 adds TDS, CON-P40 adds TDS and salinity.

  • 03

    Automatic calibration

    1 to 3 point calibration with automatic standard recognition.

  • 04

    Temperature compensation

    Automatic compensation from 0 to 60°C referenced to 25°C.

  • 05

    Auto-Read endpoint

    Senses and locks the stable reading automatically.

  • 06

    Battery saving

    Auto power off 8 minutes after the last key press.

From order to operation

We stay with the instrument after it arrives

Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.

  1. 01

    Consult

  2. 02

    Plan

  3. 03

    Supply

  4. 04

    Install

  5. 05

    Train

  6. 06

    Support

Talk to the technical team

Tell us the application. We will specify the system.

Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.