Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: REV-1005II
Rotary Evaporator REV-1005II
5 L rotary evaporator with brushless motor, 0 to 120 rpm rotation, automatic electric bath lift and a bath from room temperature to 180 °C.
Key specifications
- Model
- REV-1005II
- Voltage/Frequency
- 220V 50Hz/110V 60Hz
- Total Power
- 2100W
- Rotary motor power
- 60W
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Rotary Evaporator REV-1005II
Request a quoteOverview
Product overview
The REV-1005II is a rotary evaporator with a 5 L evaporating flask and 3 L collecting flask for solvent removal and concentration. All parts in contact with the material are high borosilicate 3.3 glass and PTFE, and the system is sealed with a PTFE and fluororubber compound seal, reaching a vacuum of 0.095 MPa.
A brushless geared motor rotates the flask from 0 to 120 rpm without sparks and with low noise, and a second brushless motor lifts the bath electrically over a 140 mm stroke. The 304 stainless steel bath heats from room temperature to 180 °C with ±1 °C accuracy via a PT100 probe, and one large LCD controls rotation, heating and lifting together. An upright double-layer serpentine condenser offers 0.5 m² of condensing area.
A piston feed valve allows continuous feeding under vacuum, and a vacuum switching valve lets material be collected and discharged without breaking vacuum. Over-temperature cut-off, anti-dry protection, double fuses and no automatic reheating after a power cut are included.
Specifications
Technical specifications
27 parameters
Specifications
- Model
- REV-1005II
- Voltage/Frequency
- 220V 50Hz/110V 60Hz
- Total Power
- 2100W
- Rotary motor power
- 60W
- Lifting motor power
- 40W
- Heating power
- 2000W
- Vacuum
- 0.095Mpa
- Rotary flask volume
- 5LΦ230mm/Φ80 flange port
- Collecting flask volume
- 3LΦ195mm/upper Φ50 flange port×Φ35 flange port×2 pcs × lower Φ50 flange port
- Rotary speed
- 0-120rpm
- Temperature control range
- Room temperature-180℃
- Temperature control accuracy
- ±1℃
- Bath lifting stroke
- 140mm
- Condenser dimension
- Φ120×600H(mm) side Φ50 flange port × lower Φ50 flange port
- Condensing area
- 0.5㎡
- Gas cylinder
- Left Φ35 flange port, side Φ50 flange port, rightΦ50 flange port
- Material feeding valve
- Φ35 flange port, glass + PTFE valve, material feeding valve (pagoda joint) with 12mm outer diameter
- Releasing valve
- Φ35 flange port×2, glass + PTFE valve, releasing valve (pagoda joint)with 12mm outer diameter
- Material discharging valve
- Φ50 flange port, side discharging valve (pagoda joint) with 20mm outer diameter, 260mm from the ground
- Vacuum nozzle
- Pagoda joint with 10mm outer diameter
- In and out circulating nozzle of condenser coil
- Pagoda joint with 16mm outer diameter
- Bath dimension/weight
- Φ295×175H(mm) about 12L
- Overall dimension(W*D*H)
- 980×480×1260mm
- Net weight
- 46KG
- Packing dimension
- 800×450×1090mm wooden package 0.39m³
- Packing weight
- 68KG
- Supporting products
- REV-1005II+Water Circulating Vacuum PumpVACP-WC3Y+Low Temperature Circulator RECL20-20
Features
Key features
- 01
5 L flask capacity
5 L evaporating flask and 3 L collecting flask with bottom discharge valve.
- 02
Brushless motors
Spark-free, low-noise motors for rotation from 0 to 120 rpm and for bath lifting.
- 03
Heated bath to 180 °C
304 stainless steel bath with PT100 control to ±1 °C and an insulating silicone cover.
- 04
Single LCD control
One display controls rotation, heating and lifting at the same time.
- 05
Continuous operation
Feed and vacuum switching valves allow feeding and collection without breaking vacuum.
- 06
Safety protection
Over-temperature cut-off, anti-dry protection and double fuses.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.