
Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
70 L benchtop shaking incubators with servo drive up to 600 rpm, heating or refrigerated models from 4 to 65 °C, and USB data recording.
Key specifications
ICB-S Series Benchtop Shaking Incubator
Request a quoteOverview
The ICB-S series are 70 L benchtop constant temperature shaking incubators with forced convection, available as ICB-S100B, ICB-S200B, ICB-S100D, ICB-S200D, ICB-SL100F and ICB-SL200F. The 100 models heat from room temperature +5 °C to 65 °C, while the 200 models add CFC-free R134a refrigeration for 4 to 65 °C with frost-free operation and automatic defrosting. Temperature fluctuation is 0.1 °C or less and uniformity ±0.6 °C at 37 °C.
The range covers multidimensional, unidimensional and track drive systems with a 26 mm orbit or adjustable 0 to 50 mm orbit, and speed ranges of 20 to 300, 20 to 600 or 20 to 260 rpm depending on the drive, with static culture also possible. A servo motor with PID feedback holds speed within ±1 rpm, and slow start and stop protect cells from shear. Multi-step programs set speed, temperature and time in one run, and the timer covers 0 to 9999 h or continuous operation.
USB data recording logs the whole run for download, analysis and printing. Flask clamps hold up to 23 × 100 mL or 4 × 2000 mL flasks, an alarm sounds when temperature deviates by 3 °C or more, and opening the door stops the shaker.
Specifications
28 parameters
100 models reach RT+5 to 65 °C; 200 models refrigerate to 4 °C with automatic defrost.
PID feedback holds speed within ±1 rpm with quiet, durable operation.
Slow acceleration and deceleration avoid shear damage to cells and bacteria.
Speed, temperature and time steps can be set at once and switched automatically.
Logs the full process for download, charting and printing to trace experiments.
Shaking stops when the door opens, with over-temperature and fault alarms.
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
Consult
Plan
Supply
Install
Train
Support
Talk to the technical team
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.