Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: WB-1R3H-6R
WB-1R3H-6R Thermostatic Water Bath, 3 Tanks
Three-tank digital water bath with 3 × 2 L stainless steel tanks, control from RT+5°C to 100°C and ±0.3°C accuracy at 37°C.
Key specifications
- Project
- WB-1R3H-6R
- Temp. setting range
- 0°C ~ 100°C
- Temp. control range
- RT.+5°C ~ 100°C
- Timing range
- 1min~99h59min/∞
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
WB-1R3H-6R Thermostatic Water Bath, 3 Tanks
Request a quoteOverview
Product overview
The WB-1R3H-6R is a microprocessor-controlled thermostatic water bath with three independent 2 L stainless steel tanks, each with a working area of 125 × 100 × 115 mm. Temperature is controlled from ambient plus 5°C up to 100°C with accuracy and uniformity of ±0.3°C at 37°C and 0.1°C display resolution.
Temperature and time are set digitally with an independent LED display, and the timer runs from 1 minute to 99 h 59 min or continuously. Heating from 25°C to 100°C takes no more than 30 minutes with 900 W total power.
The gabled lid directs condensation to the front and back of the tank, away from samples, and speeds up heating while reducing the need to top up water. Each tank has a side drain, and a water level detector and over-heating protection guard against dry running.
Specifications
Technical specifications
16 parameters
8. Over-heating protection device is included.
- Project
- WB-1R3H-6R
- Temp. setting range
- 0°C ~ 100°C
- Temp. control range
- RT.+5°C ~ 100°C
- Timing range
- 1min~99h59min/∞
- Temp. accuracy
- ≤±0.3°C @37°C
- Display accuracy
- 0.1°C
- Temp. uniformity
- ≤±0.3°C @37°C
- Heating time
- ≤ 30min(25°C ~100°C)
- Number of tanks
- 3
- Tank capacity
- 3*2L
- Working area
- 125*100*115mm*3
- Power
- 900W
- Electricity
- AC220V or 110V/50-60Hz
- Fuse
- 250V 3A Ф5*20
- Dimension
- 588*254*310mm
- Weight
- 8.5kg
Features
Key features
- 01
Three independent tanks
Three 2 L stainless steel tanks allow several incubations at once on one footprint.
- 02
Precise digital control
Microprocessor control holds temperature to ±0.3°C at 37°C with 0.1°C display resolution.
- 03
Gabled condensation lid
The lid diverts condensation away from samples and speeds up heating.
- 04
Side drain
An independent drain on each tank makes emptying and cleaning simple.
- 05
Dry-run protection
Built-in water level detection and over-heating protection prevent dry burning.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.