Benchtop Low Speed Centrifuge CFG-5DK
Benchtop low speed centrifuge reaching 5500 r/min and 5310 ×g with a maximum capacity of 4 × 500 mL and swing rotors for tubes and microplates.
View product
Reference: LWP-S3-20VF / LWP-S3-30VF
LWP-S3-20VF / LWP-S3-30VF Ultrapure Water Purifier
Ultrapure water systems producing 20 or 30 L/h from tap water, delivering 18.25 MΩ·cm water with TOC below 3 ppb plus 10 to 16 MΩ·cm purified water.
Key specifications
- Production Rate
- LWP-S3-20VF: 20 L/h; LWP-S3-30VF: 30 L/h
- Dispensing Rate
- 1.5–2 L/min (with pressure tank)
- Feed Water Requirements
- Urban tap water, inlet pressure: 0.15–0.5MPa, temperature: 5–40 °C
- Ion Rejection Rate
- 97%–99% (with new RO membrane)
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
LWP-S3-20VF / LWP-S3-30VF Ultrapure Water Purifier
Request a quoteOverview
Product overview
The LWP-S3-20VF and LWP-S3-30VF are ultrapure water purifiers that produce 20 L/h and 30 L/h from municipal tap water, dispensing at 1.5 to 2 L/min from a built-in 8 L pressure tank. They supply two water grades: purified water at 10 to 16 MΩ·cm with TOC below 30 ppb, and ultrapure water at 18.25 MΩ·cm with TOC below 3 ppb, heavy metals below 0.01 ppb, endotoxin below 0.001 EU/mL, RNases below 1 pg/mL and DNases below 5 pg/mL.
Pre-treatment uses a washable 10 µm 316L stainless steel pre-filter in place of PP cotton and a long-acting KDF stage to remove chlorine and heavy metals. An RO membrane rejects 97 to 99% of ions, followed by a dual-wavelength UV lamp to reduce TOC and a 5000 Da ultrafiltration module to remove pyrogens. Filters are U-type quick-connect cartridges.
A backlit LCD monitors RO conductivity and UP resistivity online, with alarms for water quality, pressure and full tank, filter replacement reminders and touch-key dispensing. A TDS pen is supplied, and an RS-232C interface and telescopic dispensing gun are optional.
Specifications
Technical specifications
22 parameters
Specifications
- Production Rate
- LWP-S3-20VF: 20 L/h; LWP-S3-30VF: 30 L/h
- Dispensing Rate
- 1.5–2 L/min (with pressure tank)
- Feed Water Requirements
- Urban tap water, inlet pressure: 0.15–0.5MPa, temperature: 5–40 °C
- Ion Rejection Rate
- 97%–99% (with new RO membrane)
- Organic Matter Rejection Rate
- >99% (when MW > 200 Dalton)
- Particle and Bacterial Rejection
- >99%
- Application
- Glassware cleaning
- Resistivity (25℃)
- 10–16MΩ·cm @ 25 °C
- Conductivity
- <0.1μS/cm
- Total Organic Carbon (TOC) *
- <30 ppb
- Application
- Pretreatment for ultrapure water systems; feedwater for biochemical analyzers, electroplating, painting, battery charging, semiconductor rinsing, microbiological culture media preparation, chemical & biochemical reagent preparation, buffer preparation, photographic film processing, stability chambers, meteorological testing equipment, hydrogen generators, and salt spray test chambers.
- Resistivity (25℃)
- 18.25MΩ·cm @ 25 °C
- Heavy Metal Ions
- <0.01 ppb
- Total Organic Carbon (TOC) *
- <3 ppb
- Bacteria
- <1 CFU/mL (with terminal filter)
- Particulate Matter (>0.1μm)
- <1/mL
- Pyrogen (Endotoxin)
- <0.001 EU/mL
- Ribonucleases (RNases)
- <1 pg/mL
- Deoxyribonucleases (DNases)
- <5 pg/mL
- Application
- Molecular biology, life sciences, gene research, cell culture, amino acid analysis, protein purification, toxicology, drug development, and medical testing.
- Electrical Requirements
- 100–240 V, 50/60 Hz, 48–72 W
- System Configuration
- Main unit (including 1 set of purification column) + 8 L built-in pressurized water storage tank + TDS pen + accessory kit
Features
Key features
- 01
Two water grades
10 to 16 MΩ·cm purified water and 18.25 MΩ·cm ultrapure water from one system.
- 02
Washable pre-filter
10 µm 316L stainless steel screen replaces PP cotton and can be flushed at any time.
- 03
KDF pre-treatment
Removes residual chlorine and heavy metals to protect downstream stages.
- 04
UV and ultrafiltration
Dual-wavelength UV lowers TOC and a 5000 Da UF module removes pyrogens.
- 05
Online monitoring
Displays RO conductivity and UP resistivity with quality and pressure alarms.
- 06
Built-in pressure tank
8 L tank with replaceable antibacterial bladder for 1.5 to 2 L/min dispensing.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Infitek
High Speed Refrigerated Centrifuge CFGR-B16B
High speed refrigerated centrifuge reaching 16500 r/min and 21380 ×g with temperature control from -20 to 40°C, suited to gene, protein and nucleic acid work.
View product
Microhematocrit Centrifuge CFG-14D, CFG-12D
Compact microhematocrit centrifuges spinning 24 capillary tubes at up to 12000 rpm and 13680 ×g, driven by maintenance-free brushless DC motors.
View product
Low Speed Refrigerated Centrifuge CFGR-6Y
Floor-standing low speed refrigerated centrifuge with 6 × 1000 mL capacity, up to 6000 r/min and 6600 ×g, and temperature control from -20 to 40°C.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.