LAC Series Oil-Free Laboratory Air Compressors
Oil-free laboratory air compressors from 35 to 220 L/min with integrated storage tank, humidity removal and automatic water drain, for AAS, ICP-OES and gas generators.
View product
Reference: MultiVap 12
MultiVap 12 Automated Parallel Evaporator Concentrator
Twelve-position automatic parallel concentrator for 50 and 200 mL cups with vortex nitrogen purge, Far-IR end-point detection and integrated vapor exhaust.
Key specifications
- Positions
- 12, supporting 50 and 200 mL concentration cups
- End-point detection
- 12 Far-IR sensors; automatic liquid end point 0.5 and 1 mL, or dry
- Nitrogen purge
- Vortex purge, adjustable position and direction
- Pressure regulation
- Gradient control with 3 modes: constant, step and ramp
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
MultiVap 12 Automated Parallel Evaporator Concentrator
Request a quoteOverview
Product overview
The LabTech MultiVap 12 is an automatic parallel concentration system with 12 positions for 50 and 200 mL concentration cups. LabTech states it raises capacity by 20% compared with the earlier MultiVap 10. Samples can be evaporated to dryness or concentrated to a fixed end-point volume.
A vortex nitrogen purge, adjustable in position and direction to suit cup size and sample volume, drives evaporation. Twelve Far-IR sensors watch each cup and detect the liquid end point at 0.5 or 1 mL, and a built-in digital regulator controls nitrogen flow. Pressure can be run in constant, step or ramp mode, and the liquid bath reaches 90 °C.
Operations are visible through a backlit front window, so cups do not need to be handled to check the remaining volume. An integrated vapor exhausting system allows the unit to be used outside a fume hood, offering a compact alternative to conventional rotary evaporators.
Specifications
Technical specifications
15 parameters
- Positions
- 12, supporting 50 and 200 mL concentration cups
- End-point detection
- 12 Far-IR sensors; automatic liquid end point 0.5 and 1 mL, or dry
- Nitrogen purge
- Vortex purge, adjustable position and direction
- Pressure regulation
- Gradient control with 3 modes: constant, step and ramp
- Bath temperature range
- Ambient to 90 °C
- Nitrogen requirement
- 3 to 6 bar (43 to 87 psi)
- Gas control
- Built-in digital nitrogen regulator
- Vapor handling
- Integrated vapor exhausting system; can be used outside the fume hood
- Alarms
- Low liquid level and pressure
- Dimensions (L x W x H)
- 77.3 x 45.7 x 34.5 cm
- Weight
- 39 kg
- Power supply
- 230 V, 50/60 Hz
- Capacity vs MultiVap 10
- 20% higher
- Ordering code
- LV-MT12200
- Documentation
- LabTech Advanced Concentration Solutions brochure
Features
Key features
- 01
Automatic end point
Far-IR sensors detect 0.5 or 1 mL end points per cup.
- 02
Vortex nitrogen purge
Adjustable purge position and direction for fast evaporation.
- 03
Gradient pressure control
Constant, step and ramp modes.
- 04
Hands-off monitoring
Backlit front window; cups need not be handled during the run.
- 05
Fume extraction built in
Integrated vapor exhaust allows use outside the fume hood.
- 06
50 and 200 mL cups
Supports both cup sizes in the same instrument.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Labtech
Micro Centrifuges
Five compact ventilated and refrigerated micro centrifuges for microtubes and PCR strips, reaching up to 27,237 xg in a small footprint.
View product
Large Capacity High-Speed Centrifuges
Three multi-purpose, large capacity benchtop and floor-standing centrifuges up to 54,111 xg, with swing-out capacity up to 4 x 750 mL or 8 blood bags.
View product
Low-Speed Clinical Centrifuges
Three compact low-speed centrifuges, ventilated and refrigerated, for routine clinical work up to 3,960 xg, with 4 x 100 mL swing-out capacity.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.