Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Reference: AET-4025 to AET-7095WC; AETR
AET Thermal Test Chiller System (-75 to 250 °C)
Gas-based temperature control system for chucks, chambers and hot plates, delivering -75 to 250 °C air at ±0.1 °C outlet accuracy and 22 to 95 m³/h flow.
Key specifications
- Temperature range
- -40 to 250 / -75 to 250 °C
- Temperature accuracy (steady-state outlet)
- ±0.1 °C
- Remote process accuracy
- ±0.5 °C
- Air handling
- 25 / 50 / 95 m³/h
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
AET Thermal Test Chiller System (-75 to 250 °C)
Request a quoteOverview
Product overview
The AET series is a thermal test chiller for industrial gas cooling. Compressed air passes through a built-in dryer to a dew point of -70 °C or below, is cooled and heated, and leaves as a stable, constant-pressure stream used to control the temperature of chucks, chamber environments, heat plates, material shuttles and electronic components.
Models AET-4025, 4050 and 4095 reach -40 to 250 °C; AET-7025, 7050W and 7095W reach -75 to 250 °C, with 25, 50 or 95 m³/h air handling. Outlet accuracy is ±0.1 °C and remote process accuracy ±0.5 °C. AETR is the eco-friendly refrigerant version.
Specifications
Technical specifications
8 parameters
Performance
- Temperature range
- -40 to 250 / -75 to 250 °C
- Temperature accuracy (steady-state outlet)
- ±0.1 °C
- Remote process accuracy
- ±0.5 °C
- Air handling
- 25 / 50 / 95 m³/h
- Heating power
- 3000 / 3000 / 4000 W
Hydraulics
- Pressure range
- 0.6 to 0.8 MPa
Physical
- Refrigerant
- R454C / R290 / CO2 / R508B
- Air requirement
- Filter < 1 µm, oil < 1 mg/m³, dew point < 10 °C
Features
Key features
- 01
Gas outlet ±0.1 °C
Remote process ±0.5 °C.
- 02
Built-in dryer
Pre-dries air to -70 °C dew point.
- 03
Three flow sizes
25, 50 and 95 m³/h.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.