Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Photos available on requestReference: CLKDOC78
CLKDOC78 Fluorinated Heat-Transfer Liquid
Hydrofluoroether coolant (C4F9OC2H5) with zero ODP, low GWP and a -138 °C pour point, for semiconductor cold plates, immersion cooling and electronics reliability testing.
Key specifications
- Chemical composition
- C4F9OC2H5 (hydrofluoroether)
- CAS number
- 163702-06-5
- Molecular weight
- 264 g/mol
- Purity
- 99.5 %
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
CLKDOC78 Fluorinated Heat-Transfer Liquid
Request a quoteOverview
Product overview
CLKDOC78 is a fluorinated liquid based on hydrogen fluoroether. It has zero ozone depletion potential, a GWP of 59 and a 0.77 year atmospheric lifetime, and is described as non-toxic, non-corrosive and non-flammable with high dielectric strength (above 25 kV at a 0.1 inch gap).
Boiling point is 76 °C, pour point -138 °C, liquid density 1.43 g/cm³, specific heat 1220 J/kg·K and thermal conductivity 0.069 W/m·K. Typical uses are semiconductor cold plate cooling, data center immersion cooling, avionics spray cooling and reliability testing of electronic components.
Specifications
Technical specifications
12 parameters
Composition
- Chemical composition
- C4F9OC2H5 (hydrofluoroether)
- CAS number
- 163702-06-5
- Molecular weight
- 264 g/mol
- Purity
- 99.5 %
Physical
- Boiling point
- 76 °C
- Pour point
- -138 °C
- Liquid density
- 1.43 g/cm³
- Specific heat capacity
- 1220 J/kg·K
- Thermal conductivity
- 0.069 W/m·K
Safety
- Ozone depletion potential
- 0
- Global warming potential
- 59
- Flash point
- No flash point
Features
Key features
- 01
Zero ODP, low GWP
Environmental and safety profile published.
- 02
High dielectric strength
Above 25 kV (0.1 inch gap).
- 03
Wide liquid range
Pour point -138 °C, boiling point 76 °C.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.