Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Reference: GD two-layer aging chamber
GD Chip Aging Test Chamber (-40 to 150 °C)
Two-layer aging chamber for chip and PCB burn-in, -40 to 150 °C with temperature fluctuation of ±1 °C or better.
Key specifications
- Temperature range
- -40 to 150 °C
- Heating rate (no load)
- 1 °C/min, -40 to +125 °C
- Cooling rate (no load)
- 1 °C/min, 125 to -40 °C
- Temperature fluctuation
- ≤ ±1 °C
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
GD Chip Aging Test Chamber (-40 to 150 °C)
Request a quoteOverview
Product overview
The GD chip aging chamber simulates the working conditions of chips in extreme environments, applying high and low temperature to accelerate aging so early-failure parts can be screened out in a short time. It is intended for semiconductor and PCB aging tests.
Range is -40 to 150 °C with 1 °C/min heating from -40 to 125 °C and 1 °C/min cooling from 125 to -40 °C unloaded; rates can be customized between 5 and 25 °C/min. LNEYA provides a model data sheet on request.
Specifications
Technical specifications
4 parameters
Performance
- Temperature range
- -40 to 150 °C
- Heating rate (no load)
- 1 °C/min, -40 to +125 °C
- Cooling rate (no load)
- 1 °C/min, 125 to -40 °C
- Temperature fluctuation
- ≤ ±1 °C
Features
Key features
- 01
-40 to 150 °C
Chip and PCB aging range.
- 02
±1 °C fluctuation
Stable test environment.
- 03
Customizable rate
Heating and cooling rates up to 5 to 25 °C/min on request.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.