Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Reference: GD-200-2-B-CJ, GD-400-2-B-CJ
GD Thermal Shock Chamber (-55 to 180 °C)
Two-zone basket-transfer thermal shock chamber, -55 to 180 °C, with a transfer time of 10 seconds or less and 5-minute recovery.
Key specifications
- Impact temperature range
- -55 to 180 °C
- Pre-cooling zone range
- -10 to -55 °C
- Preheating zone range
- 60 to 180 °C
- Basket transfer time
- ≤ 10 s
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
GD Thermal Shock Chamber (-55 to 180 °C)
Request a quoteOverview
Product overview
The GD thermal shock chamber moves test samples between a pre-heated and a pre-cooled zone to apply sudden thermal stress for electronics, automotive and aerospace components. Pre-cooling covers -10 to -55 °C and preheating 60 to 180 °C; basket conversion takes 10 seconds or less and the zone recovers to within ±2 °C in 5 minutes or less.
Models GD-200-2-B-CJ and GD-400-2-B-CJ have 60*60*60 cm and 90*65*70 cm baskets. The chamber is PID/PLC controlled with a 7-inch touch screen, SUS304 inner chamber, cascade refrigeration, variable-frequency compressor and PT100 Class-A sensor.
Specifications
Technical specifications
8 parameters
Performance
- Impact temperature range
- -55 to 180 °C
- Pre-cooling zone range
- -10 to -55 °C
- Preheating zone range
- 60 to 180 °C
- Basket transfer time
- ≤ 10 s
- Recovery time
- ≤ 5 min to within ±2 °C
- Temperature fluctuation
- ≤ 1 °C
Physical
- Basket size (W*H*D)
- 60*60*60 / 90*65*70 cm
Electrical
- Power supply
- 380V 50HZ
Features
Key features
- 01
-55 to 180 °C
Pre-cool and preheat zones.
- 02
Fast transfer
Basket conversion 10 seconds or less.
- 03
Quick recovery
Back within ±2 °C in 5 minutes or less.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.