Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Photos available on requestKRY Six-Channel Chiller (0 to 100 °C)
Water-cooled six-channel chiller with common temperature and independent flow (2 to 25 L/min) and pressure (0.2 to 2.5 bar) control on each of six fluid groups.
Key specifications
- Temperature range
- 0 to 100 °C
- Temperature control accuracy
- ±0.3 °C
- Heating capacity
- 15 / 25 / 38 kW
- Cooling capacity at 100 °C and 20 °C
- 25 / 38 / 60 kW
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
KRY Six-Channel Chiller (0 to 100 °C)
Request a quoteOverview
Product overview
The KRY six-channel chiller feeds six fluid outlet groups at the same temperature (0 to 100 °C, ±0.3 °C) while controlling flow and pressure on each group separately. Flow accuracy is about ±0.2 L/min per group and pressure can be set from 0.2 to 2.5 bar.
Three models, KRY-A25W/6S, A38W/6S and A60W/6S, provide 15 to 38 kW heating and 25 to 60 kW cooling. The page states refrigerants are R404A, R507C, R125 and N40, flow is controlled with a variable-frequency pump rather than proportional valves, and a magnetic-drive pump can be specified.
Specifications
Technical specifications
10 parameters
Performance
- Temperature range
- 0 to 100 °C
- Temperature control accuracy
- ±0.3 °C
- Heating capacity
- 15 / 25 / 38 kW
- Cooling capacity at 100 °C and 20 °C
- 25 / 38 / 60 kW
- Cooling capacity at 5 °C
- 18 / 27 / 42 kW
Hydraulics
- Flow per group
- 2 to 25 L/min
- Flow accuracy per group
- ±0.2 L/min
- Pressure control per group
- 0.2 to 2.5 bar
Physical
- Output groups
- 6
- Dimensions
- 200*145*205 cm
Features
Key features
- 01
Six groups
Independent flow and pressure for each outlet.
- 02
Frequency-controlled pump
Flow regulation by variable-frequency drive.
- 03
Water-cooled
60 kW maximum cooling capacity.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.