Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Photos available on requestKRYO Oil Chiller (0 to 160 °C)
Water-cooled oil chiller for motor, generator and e-drive test benches, controlling test oil from 0 to 160 °C with 15 to 38 kW heating and up to 38 kW cooling.
Key specifications
- Temperature range
- 0 to 160 (varies with oil viscosity) °C
- Temperature control accuracy
- ±0.3 °C
- Heating power
- 15 / 25 / 38 kW
- Cooling capacity at 125 °C
- 15 / 25 / 38 kW
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
KRYO Oil Chiller (0 to 160 °C)
Request a quoteOverview
Product overview
The KRYO oil chiller conditions lubricating, hydraulic or test oil during high-performance motor and equipment testing, removing heat, stabilizing oil temperature and protecting components. Range is 0 to 160 °C depending on oil viscosity with ±0.3 °C accuracy and ±0.2 L/min flow accuracy.
Models KRYO-A15W, A25W and A38W (and 2S dual-circuit versions) offer 15 to 38 kW of heating and 12 to 30 kW of cooling at 20 °C. A VFD-controlled gear pump adapts flow to load for more than 20% energy savings, scroll compressors, an electronic expansion valve, CAN bus interface and 7-inch touch or PLC control are standard.
Specifications
Technical specifications
10 parameters
Performance
- Temperature range
- 0 to 160 (varies with oil viscosity) °C
- Temperature control accuracy
- ±0.3 °C
- Heating power
- 15 / 25 / 38 kW
- Cooling capacity at 125 °C
- 15 / 25 / 38 kW
- Cooling capacity at 20 °C
- 12 / 20 / 30 kW
Hydraulics
- Flow rate accuracy
- ±0.2 L/min
- Pressure control
- 0.2 to 2.5 bar
Physical
- Refrigerant
- R410A / R448A
- Circulation pump
- Gear pump with variable-frequency vector control
Control
- Interface
- CAN bus
Features
Key features
- 01
Oil temperature control
0 to 160 °C with ±0.3 °C accuracy.
- 02
VFD gear pump
Flow adapts to load, saving over 20% energy.
- 03
CAN bus interface
Integrates with test systems.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.