Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Photos available on requestKRYZ Battery Pack Cooling System (-40 to 50 °C)
Direct-expansion refrigerant cooling and heating system for battery pack test benches, 0.5 to 10 kW with controlled suction pressure of 300 to 600 kPa.
Key specifications
- Test environment temperature range
- -40 to 50 °C
- Cooling capacity
- 0.5 to 10 kW
- Heating capacity
- 0.5 to 10 (ZLH models) kW
- Suction pressure
- 300 to 600 ±10 kPa
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
KRYZ Battery Pack Cooling System (-40 to 50 °C)
Request a quoteOverview
Product overview
The KRYZ battery pack cooling system drives refrigerant directly through the battery pack's own cooling plate, simulating a vehicle's air-conditioning loop on a test bench at -40 to 50 °C ambient test conditions. It provides 0.5 to 10 kW of cooling (and heating on the ZLH models) with suction pressure held at 300 to 600 kPa and condensation pressure better than ±50 kPa.
Rated conditions are dry bulb 20 °C, wet bulb 16 °C, inlet water 20 °C and outlet water 25 °C. Components include a variable-frequency compressor and fan, a flowmeter for refrigerant flow measurement and a programmable PLC.
Specifications
Technical specifications
7 parameters
Performance
- Test environment temperature range
- -40 to 50 °C
- Cooling capacity
- 0.5 to 10 kW
- Heating capacity
- 0.5 to 10 (ZLH models) kW
- Suction pressure
- 300 to 600 ±10 kPa
- Condensation pressure control accuracy
- Better than ±50 kPa
Physical
- Cooling method
- Variable-frequency fan
Electrical
- Power
- 380V 50HZ or 460V 60HZ
Features
Key features
- 01
Direct refrigerant loop
Refrigerant, not coolant, passes through the pack plate.
- 02
Pressure control
Suction pressure 300 to 600 kPa.
- 03
Heating option
ZLH models add heating capacity.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.