Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
KSD Thermal Probe Benchtop Forcing System (-75 to 200 °C)
Benchtop thermal probe that blows hot or cold air on a device under test, -75 to 200 °C at up to 75 °C/min with ±0.2 °C accuracy.
Key specifications
- Temperature range
- -75 to 200 °C
- Temperature accuracy
- ±0.2 °C
- Temperature ramp rate
- Up to 75 (KSDR-705-B up to 5) °C/min
- Cooling capacity at 0 °C
- 250 / 1000 / 2000 W
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
KSD Thermal Probe Benchtop Forcing System (-75 to 200 °C)
Request a quoteOverview
Product overview
The KSD series thermal probe (and eco-friendly KSDR variants) applies controlled hot and cold air at high flow velocity directly to the device under test, for chip R&D and verification across temperature. Ramp rate reaches 75 °C/min and accuracy is ±0.2 °C.
Models KSD-705-A, 705-B and 710 offer 100 to 2000 W of cooling at the listed set points, with 75 x 75 mm or 120 x 120 mm probes. The thermal head carries a dry-gas channel so the DUT stays free of condensation or frost, and it needs a LNEYA gas dryer for CDA. A Z-axis pneumatic actuator adjusts contact force on KSDR units.
Specifications
Technical specifications
8 parameters
Performance
- Temperature range
- -75 to 200 °C
- Temperature accuracy
- ±0.2 °C
- Temperature ramp rate
- Up to 75 (KSDR-705-B up to 5) °C/min
- Cooling capacity at 0 °C
- 250 / 1000 / 2000 W
- Cooling capacity at -40 °C
- 150 / 800 / 1500 W
- Cooling capacity at -55 °C
- 100 / 450 / 900 W
Physical
- Test probe size
- 75*75 / 120*120 mm
Control
- Temperature sensing
- T type / K type / PT100
Features
Key features
- 01
Fast ramp
Up to 75 °C/min heating and cooling.
- 02
Dry gas channel
Prevents condensation or freezing at the DUT.
- 03
Choice of probe size
75*75 mm or 120*120 mm.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.