Recirculating chillers LT
LNEYA LT recirculating chillers: −80 to 30 °C, ±0.5 °C; LT 10–30 °C cooling 3–14 kW at 15 °C; pump 30 L/min at 1.6 bar; MODBUS RTU RS485.
View product
Reference: ZLTZ-3 to ZLTZ-150W
ZLTZ Direct-Cooling Chiller (-80 to 25 °C)
Direct-expansion ZLTZ chiller family with sizes from ZLTZ-3 to ZLTZ-150W, with cooling capacity from 8.1 to 314.9 kW at 0 °C in the -10 to 25 °C range.
Key specifications
- Temperature range (ZLTZ family)
- -80 to 25 (sub-ranges -10 to 25, -40 to 20, -80 to -30) °C
- Cooling capacity at 0 °C (-10 to 25 °C range)
- 8.1 to 314.9 kW
- Cooling capacity at -10 °C (-10 to 25 °C range)
- 5.48 to 226.6 kW
- Heat-transfer method
- Refrigerant direct expansion
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
ZLTZ Direct-Cooling Chiller (-80 to 25 °C)
Request a quoteOverview
Product overview
The ZLTZ series cools by evaporating refrigerant directly in the load heat exchanger rather than through an intermediate liquid, which LNEYA says gives about five times the heat-transfer efficiency of liquid cooling. The -10 to 25 °C range includes ZLTZ-3, 6, 10, 15W, 20W, 30W, 40W, 75W, 100W and 150W.
Other ZLTZ ranges (-40 to 20 °C and -80 to -30 °C) are listed on the same page. The chiller is suited to cooling vacuum chucks, traps and heat exchangers with small surface area but large heat loads.
Specifications
Technical specifications
4 parameters
Performance
- Temperature range (ZLTZ family)
- -80 to 25 (sub-ranges -10 to 25, -40 to 20, -80 to -30) °C
- Cooling capacity at 0 °C (-10 to 25 °C range)
- 8.1 to 314.9 kW
- Cooling capacity at -10 °C (-10 to 25 °C range)
- 5.48 to 226.6 kW
Physical
- Heat-transfer method
- Refrigerant direct expansion
Features
Key features
- 01
Direct expansion
Refrigerant evaporates in the target heat exchanger.
- 02
Ten standard sizes
ZLTZ-3 through ZLTZ-150W in the -10 to 25 °C range.
- 03
Three temperature bands
-10 to 25, -40 to 20 and -80 to -30 °C.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from LNEYA
SUNDI heating/cooling circulators
LNEYA SUNDI circulators: −25 to +200 °C (extendable −25 to +300), ±0.5 °C medium, cooling 1.8–200 kW, heating 3.5–200 kW, pump 35–600 L/min.
View product
High-temperature heating circulators
LNEYA high-temperature heating circulators: +10 to +300 °C, ±0.5 °C (custom ±0.1), heating 5.5–130 kW; UC 50–300 °C with a 7-inch touchscreen.
View product
TCU reactor temperature control
LNEYA TCU for reactors: −120 to 250 °C, 5–60 reactors, ±0.5 °C; SR electric heat 25–80 kW; pump 200–750 L/min at 2.5 bar.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.