Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1014F / KL1014F
Bismuth Sulfite Agar
Selective plating agar for the separation and culture of Salmonella, with bismuth, sulfite and brilliant green in the formula.
Key specifications
- Product code (dehydrated powder)
- GF1014F
- Product code (granulated)
- KL1014F
- Form
- Dehydrated powder (GF) and granulated (KL) versions
- Quantity per litre of distilled or deionized water
- 50.3 g
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Bismuth Sulfite Agar
Request a quoteOverview
Product overview
Bismuth Sulfite Agar is a selective solid medium for separating and culturing Salmonella. Its formula combines peptone, beef extract and glucose with ammonium bismuth citrate, sodium sulfite, ferrous sulfate and 0.025 g/L brilliant green, set with 20 g/L agar.
Suspend 50.3 g in 1 L of distilled or deionized water and boil with frequent agitation until dissolved. Cool to 45-50 °C, shake well and pour into sterile plates. The medium must not be overheated or autoclaved. The final pH is 7.5 ± 0.2.
Dehydrated powder (GF1014F) and granulated (KL1014F) versions are listed with the same composition. The product is not for clinical use.
Specifications
Technical specifications
18 parameters
Identification
- Product code (dehydrated powder)
- GF1014F
- Product code (granulated)
- KL1014F
- Form
- Dehydrated powder (GF) and granulated (KL) versions
Preparation
- Quantity per litre of distilled or deionized water
- 50.3 g
- Dissolution
- Heat with frequent agitation and boil to dissolve completely
- Pouring
- Cool to 45-50 °C, shake well and pour into sterile plates; do not overheat or autoclave
- Final pH (25 °C)
- 7.5 ± 0.2
Storage
- Storage
- Store in a dry place away from light; tighten the cap immediately after use
- Shelf life (sealed)
- 3 years
Composition
- Peptone
- 10 g/L
- Beef Extract
- 5 g/L
- Ferrous Sulfate
- 0.3 g/L
- Ammonium Bismuth Citrate
- 2 g/L
- Sodium Sulfite
- 6 g/L
- Disodium Hydrogen Phosphate
- 4 g/L
- Glucose
- 5 g/L
- Brilliant Green
- 0.025 g/L
- Agar
- 20 g/L
Features
Key features
- 01
Salmonella separation
Used for the selective separation and culture of Salmonella.
- 02
Bismuth-sulfite system
Contains ammonium bismuth citrate, sodium sulfite, ferrous sulfate and brilliant green.
- 03
No autoclaving
Heat to boiling to dissolve only; do not overheat or autoclave.
- 04
Plate-ready
Cool to 45-50 °C and pour into sterile plates.
- 05
Shelf life
Sealed product keeps for 3 years, dry and away from light.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.