Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Copure® 24-Well Pesticide Residue Purification Plates
24-well clean-up plates for pesticide residue analysis offering QuEChERS-equivalent recovery, four matrix-specific versions (light/dark pigment produce, grains and nuts, tea and spices) and no syringe-filter step.
Key specifications
- Format
- 24-well clean-up plate
- Filtration
- Samples filtered with 0.22 μm nylon membrane can be injected directly (no syringe filter needed)
- Performance claim
- Recovery and clean-up effect equivalent to traditional QuEChERS
- NC24001
- Light-pigment vegetables, fruits and edible fungi; 1 pc/box
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Copure® 24-Well Pesticide Residue Purification Plates
Request a quoteOverview
Product overview
Copure® 24-Well Pesticide Residue Purification Plates process 24 samples at a time and suit automated preparation workstations. Biocomma states that recovery and purification are equivalent to the traditional QuEChERS method, with more stable and reproducible data. Samples filtered through a 0.22 μm nylon membrane can be injected directly, so no syringe filter is needed.
Operation is simplified when used with the biocomma® Positive Pressure 24 Processor, which cuts detection time and improves efficiency. Four versions match common matrices: light-pigment vegetables, fruits and edible fungi (NC24001); dark-pigment ones (NC24002); grains, oil and nuts (NC24003); and tea and spices (NC24004).
Extraction salt tubes, a multi-tube vortex mixer, a vial tray, the positive pressure processor and a nitrogen evaporator are listed as matching products. Application notes cover 26 pesticide residues in corn and 28 in strawberry and lettuce.
Specifications
Technical specifications
13 parameters
Product
- Format
- 24-well clean-up plate
- Filtration
- Samples filtered with 0.22 μm nylon membrane can be injected directly (no syringe filter needed)
- Performance claim
- Recovery and clean-up effect equivalent to traditional QuEChERS
Ordering information
- NC24001
- Light-pigment vegetables, fruits and edible fungi; 1 pc/box
- NC24002
- Dark-pigment vegetables, fruits and edible fungi; 1 pc/box
- NC24003
- Grains, oil and nuts; 1 pc/box
- NC24004
- Tea and spices; 1 pc/box
Related products
- COQ050010H
- Extraction salts + 50 mL tube: 4 g MgSO4, 1 g NaCl, 1 g trisodium citrate, 0.5 g disodium citrate; 50 pcs/box
- COQ050020H
- Extraction salts + 50 mL tube: 6 g MgSO4, 1.5 g NaOAc; 50 pcs/box
- SDC-3000-D
- biocomma® Multi-Tube Vortex Mixer; 1 set/carton
- NC24DZ
- 24-Well Vial Tray; 1 set/carton
- BCY2402
- Positive Pressure 24 Processor; 1 set/carton
- BCY2403
- 24-Well Intelligent Nitrogen Evaporator, flat-bottom plate; 1 set/carton
Features
Key features
- 01
High throughput
24 samples per run, suitable for automated preparation workstations.
- 02
QuEChERS-equivalent recovery
Recovery and purification effect equivalent to the traditional QuEChERS method.
- 03
No syringe filter needed
Samples filtered with 0.22 μm nylon membrane can be run directly.
- 04
Matrix-matched versions
Light or dark pigment produce, grains/oil/nuts, and tea/spices.
- 05
Easy operation
Works with the biocomma® Positive Pressure 24 Processor to simplify purification.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.