Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: MSLE96200 / MSLE96400
Copure® 96-Well Supported Liquid Extraction (SLE) Plate
96-well supported liquid extraction plate on porous diatomite that replaces conventional liquid-liquid extraction, avoids emulsions and follows a simple load-and-elute workflow.
Key specifications
- Support material
- Porous diatomite filler (high specific surface area, strong chemical inertia)
- Format
- 96-well plate
- Product code (200 µL / 1 mL)
- MSLE96200
- Product code (400 µL / 2 mL)
- MSLE96400
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Copure® 96-Well Supported Liquid Extraction (SLE) Plate
Request a quoteOverview
Product overview
The Copure® 96-well SLE plate uses porous diatomite with a high specific surface area and strong chemical inertia as the carrier for liquid-liquid partitioning. It is intended to replace most traditional liquid-liquid extraction procedures with better extraction efficiency and stability.
Because the aqueous sample is held on the support, emulsion formation is avoided. The workflow is simply load and elute, which saves solvent and time and is easy to automate; the source reports better reproducibility, higher recovery, lower detection limits and higher sensitivity.
The method is used in food safety, environmental monitoring, clinical diagnosis and industrial product testing. The plate is available in two capacities, 200 µL / 1 mL and 400 µL / 2 mL.
Specifications
Technical specifications
6 parameters
Construction
- Support material
- Porous diatomite filler (high specific surface area, strong chemical inertia)
- Format
- 96-well plate
Ordering
- Product code (200 µL / 1 mL)
- MSLE96200
- Product code (400 µL / 2 mL)
- MSLE96400
- Packaging
- 1 plate per box
Application
- Application fields
- Food safety, environmental monitoring, clinical diagnosis, industrial product detection
Features
Key features
- 01
Replaces liquid-liquid extraction
Provides an ideal surface for liquid-liquid partitioning of target analytes in place of traditional extraction.
- 02
No emulsions
The supported format avoids the emulsion problems common with conventional liquid-liquid extraction.
- 03
Simple, automatable workflow
Load and elute only, saving solvent and time and suiting automation.
- 04
Reproducibility and recovery
Published as delivering better reproducibility and higher recovery.
- 05
Sensitivity
Lower detection limits and higher sensitivity are reported for the method.
- 06
Wide application range
Used in food safety, environmental monitoring, clinical diagnosis and industrial product detection.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.