Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: HNC01 / HNC02
Copure® HPLC Columns for Pesticide Residue
Copure® HPLC columns for multi-residue pesticide analysis, built on ultra-high-purity silica with narrow particle size distribution; 2.1 × 100 mm in 3 μm and 1.7 μm for UPLC-MS/MS workflows.
Key specifications
- Silica
- Ultra-high-purity silica with narrow particle size distribution; stable bonding and precise end-capping
- HNC01
- 2.1 mm × 100 mm, 3 μm; 1 unit/box
- HNC02
- 2.1 mm × 100 mm, 1.7 μm; 1 unit/box
- Example method
- UPLC-MS/MS (Thermo Fisher TSQ Endura); HNC01; 2 mmol/L ammonium formate-formic acid in water / methanol gradient; 0.3 mL/min; 40 °C; 2 μL; HESI positive and negative modes
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Copure® HPLC Columns for Pesticide Residue
Request a quoteOverview
Product overview
Copure® HPLC columns for pesticide residue use ultra-high-purity silica with a narrow particle size distribution, a mature and stable bonding technology and a precise end-capping process. This combination is intended to give high column efficiency and a suitable pressure range.
In pesticide residue analysis Biocomma describes high sensitivity, excellent separation and symmetrical peak shapes, improving the accuracy and reliability of detection. The page shows a UPLC-MS/MS method (Thermo Fisher TSQ Endura) with a gradient of ammonium formate-formic acid water and methanol, covering analytes such as metalaxyl, thiamethoxam, imidacloprid, carbendazim, azoxystrobin, fipronil and abamectin.
Two catalog items are listed, both 2.1 × 100 mm: HNC01 (3 μm) and HNC02 (1.7 μm).
Specifications
Technical specifications
5 parameters
Column
- Silica
- Ultra-high-purity silica with narrow particle size distribution; stable bonding and precise end-capping
Ordering information
- HNC01
- 2.1 mm × 100 mm, 3 μm; 1 unit/box
- HNC02
- 2.1 mm × 100 mm, 1.7 μm; 1 unit/box
Application example
- Example method
- UPLC-MS/MS (Thermo Fisher TSQ Endura); HNC01; 2 mmol/L ammonium formate-formic acid in water / methanol gradient; 0.3 mL/min; 40 °C; 2 μL; HESI positive and negative modes
- Example analytes
- Metalaxyl, methomyl, aldicarb sulfoxide, thiamethoxam, imidacloprid, clothianidin, acetamiprid, carbendazim, carbofuran, azoxystrobin, dimethomorph, prochloraz, fipronil, pyraclostrobin, emamectin benzoate, abamectin, etoxazole and others
Features
Key features
- 01
Ultra-high-purity silica
Narrow particle size distribution for high column efficiency and suitable pressure.
- 02
Precise end-capping
Mature bonding technology and precise end-capping for symmetrical peaks.
- 03
High sensitivity
Described as giving high sensitivity and excellent separation in pesticide residue analysis.
- 04
Documented multi-residue method
UPLC-MS/MS conditions shown for a wide list of pesticides.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.