Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1076F / GF601F
Fluid Thioglycollate Medium (FTM)
Fluid thioglycollate broth for cultivating aerobic, microaerophilic and anaerobic bacteria and for sterility testing of pharmaceutical and biological products.
Key specifications
- Product code, general (dehydrated powder)
- GF1076F
- Product code, general (granulated)
- KL1076F
- Product code, FTM sterility-test grade (dehydrated powder)
- GF601F
- Form
- Dehydrated powder; GF1076F also granulated
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Fluid Thioglycollate Medium (FTM)
Request a quoteOverview
Product overview
Fluid Thioglycollate Medium (FTM) supports the cultivation of aerobic, microaerophilic and anaerobic bacteria. It is also used for sterility testing of pharmaceutical and biological products, and (for GF1076F/KL1076F) for the anaerobic cultivation of Clostridium perfringens in food. The formulation uses casein digest, yeast extract, glucose, L-cystine, sodium thioglycollate and a low agar level (0.75 g/L), and resazurin, at a final pH of 7.1±0.2.
Prepare 29.3 g per litre and autoclave at 121 °C for 15 minutes. If the pink zone exceeds one-third of the medium height (GF1076F/KL1076F), heat it in a water bath until colorless; if more than 30% is pink (GF601F), reheat once at 100 °C. If the whole tube is pink, do not use. GF601F is stored at 2-25 °C; all codes have a 3-year sealed shelf life.
Specifications
Technical specifications
18 parameters
Product
- Product code, general (dehydrated powder)
- GF1076F
- Product code, general (granulated)
- KL1076F
- Product code, FTM sterility-test grade (dehydrated powder)
- GF601F
- Form
- Dehydrated powder; GF1076F also granulated
Preparation
- Preparation (GF1076F / KL1076F)
- Weigh 29.3 g into 1 L of distilled or deionized water; stir and boil to dissolve; dispense into test tubes and autoclave at 121 °C for 15 min. If the pink zone exceeds one-third of the medium height, heat in a water bath until colorless and cool below 45 °C before inoculation; if the whole tube is pink, do not use.
- Preparation (GF601F)
- Suspend 29.3 g in 1 L of purified water; boil to dissolve; autoclave at 121 °C for 15 min. If more than 30% of the medium is pink before use, reheat once (100 °C); if all of it is pink, do not use.
- Final pH (25 °C, all codes)
- 7.1±0.2
Storage
- Storage (GF1076F / KL1076F)
- Store in a dark and dry place at room temperature; tighten the bottle cap immediately after use.
- Storage (GF601F)
- Store in a dark and dry place at 2-25 °C; tighten the bottle cap immediately after use.
- Shelf life, sealed (all codes)
- 3 years
Composition
- Tryptone / pancreatic digest of casein
- 15 g/L
- L-Cystine
- 0.5 g/L
- Glucose / dextrose
- 5 g/L
- Yeast extract
- 5 g/L
- Sodium chloride
- 2.5 g/L
- Sodium thioglycollate
- 0.5 g/L
- Resazurin
- 0.001 g/L
- Agar
- 0.75 g/L
Features
Key features
- 01
Aerobes, microaerophiles and anaerobes
Cultivates all three groups of bacteria.
- 02
Pharmaceutical sterility testing
Used for sterility testing of pharmaceutical and biological products.
- 03
Anaerobic culture from food
GF1076F and KL1076F are also stated for the anaerobic cultivation of Clostridium perfringens in food.
- 04
Clear fitness check
Reheat once if more than one-third (or 30%) is pink; do not use if the whole medium is pink.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.