Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1055F
King's B Medium
Non-selective agar for isolating and cultivating Pseudomonas species and promoting pigment production, prepared as slants.
Key specifications
- Product code
- GF1055F
- Form
- Dehydrated culture medium (powder)
- Standard (ACC)
- ISO 16266
- Preparation
- Suspend 38.0 g in 1 L of purified water and add 10 mL glycerol; boil to dissolve; distribute into test tubes; autoclave at 121 °C for 15 minutes; cool tubes in a slanted position to form slants
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
King's B Medium
Request a quoteOverview
Product overview
King's B Medium is listed for non-selective isolation, cultivation and pigment production of Pseudomonas species, and the product page cites ISO 16266. The base is built on peptone with dipotassium hydrogen phosphate and magnesium sulfate, and glycerol is added at preparation.
Suspend 38.0 g in 1 L of purified water with 10 mL of glycerol, boil to dissolve, dispense into test tubes and autoclave at 121 °C for 15 minutes. The tubes are then cooled in a slanted position to give slants. Sealed product has a 3-year shelf life.
Specifications
Technical specifications
13 parameters
Identification
- Product code
- GF1055F
- Form
- Dehydrated culture medium (powder)
- Standard (ACC)
- ISO 16266
Preparation
- Preparation
- Suspend 38.0 g in 1 L of purified water and add 10 mL glycerol; boil to dissolve; distribute into test tubes; autoclave at 121 °C for 15 minutes; cool tubes in a slanted position to form slants
Properties
- Final pH (25 °C)
- 7.2±0.2
Storage & handling
- Storage
- Store in a dark, dry place at 2-25 °C; tighten the bottle cap immediately after use.
- Shelf life (sealed product)
- 3 years
- Precautions
- Not for clinical use. Do not use if the powder is lumpy. After use, autoclave all contaminated materials at 121 °C for 30 minutes before disposal.
Composition
- Peptone
- 20.0 g/L
- Dipotassium Hydrogen Phosphate
- 1.5 g/L
- Magnesium Sulfate Heptahydrate
- 1.5 g/L
- Agar
- 15.0 g/L
- Glycerol (added at preparation)
- 10 mL/L
Features
Key features
- 01
Pseudomonas cultivation
For non-selective isolation, cultivation and pigment production of Pseudomonas species.
- 02
ISO 16266 reference
The product page lists ISO 16266 as its standard reference.
- 03
Slant preparation
Dispensed into test tubes, autoclaved and cooled in a slanted position.
- 04
Glycerol added at preparation
10 mL of glycerol per litre is added when suspending the powder.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.