Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Magnetic Beads
Monodisperse magnetic beads in 100 nm and 500 nm particle sizes at 50 mg/mL, with fast magnetic response and good batch-to-batch repeatability.
Key specifications
- MSI500-0501-200
- Particle size 500 nm; binding capacity 10.5 µg/mg
- MSI500-0511-200
- Particle size 500 nm; binding capacity 2.5 µg/mg
- MSI100-0507-200
- Particle size 100 nm; binding capacity 12.5 µg/mg
- MSI100-0517-200
- Particle size 100 nm; binding capacity 2.0 µg/mg
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Magnetic Beads
Request a quoteOverview
Product overview
These magnetic beads are suitable for a wide range of samples. They have high magnetic content and a fast magnetic response, making them easy to separate, with good monodispersity and uniform particle size. Small variance between batches gives good repeatability.
Four products are listed, in 500 nm and 100 nm particle sizes, all at a concentration of 50 mg/mL and supplied in 200 mL bottles. Binding capacity varies by product: 10.5 and 2.5 µg/mg for the 500 nm beads, and 12.5 and 2.0 µg/mg for the 100 nm beads.
Specifications
Technical specifications
6 parameters
Ordering
- MSI500-0501-200
- Particle size 500 nm; binding capacity 10.5 µg/mg
- MSI500-0511-200
- Particle size 500 nm; binding capacity 2.5 µg/mg
- MSI100-0507-200
- Particle size 100 nm; binding capacity 12.5 µg/mg
- MSI100-0517-200
- Particle size 100 nm; binding capacity 2.0 µg/mg
- Concentration
- 50 mg/mL
- Package
- 200 mL per bottle
Features
Key features
- 01
Fast magnetic response
High magnetic content for easy separation.
- 02
Good monodispersity
Uniform particle size.
- 03
Batch-to-batch repeatability
Small variance between batches.
- 04
Two particle sizes
500 nm and 100 nm beads.
- 05
Wide sample range
Applicable to a wide range of samples.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.