Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF629F
Martin Agar Medium, Modified
Glucose-rich agar for sterility testing of biological products to detect molds and yeasts.
Key specifications
- Product code
- GF629F
- Form
- Dehydrated culture medium (powder)
- Preparation
- Suspend 42.5 g in 1 L of purified water; boil to dissolve; distribute and autoclave at 121 °C for 15 minutes
- Final pH (25 °C)
- 6.4±0.2
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Martin Agar Medium, Modified
Request a quoteOverview
Product overview
Modified Martin Agar is used in sterility testing of biological products to detect molds and yeasts. It is built on peptone and yeast extract with 20.0 g/L glucose, plus magnesium sulfate and dipotassium hydrogen phosphate.
The powder is prepared at 42.5 g per litre of purified water, boiled to dissolve, distributed and autoclaved at 121 °C for 15 minutes. Final pH is 6.4±0.2 and sealed product has a 3-year shelf life when stored dark and dry at 2-25 °C.
Specifications
Technical specifications
13 parameters
Identification
- Product code
- GF629F
- Form
- Dehydrated culture medium (powder)
Preparation
- Preparation
- Suspend 42.5 g in 1 L of purified water; boil to dissolve; distribute and autoclave at 121 °C for 15 minutes
Properties
- Final pH (25 °C)
- 6.4±0.2
Storage & handling
- Storage
- Store in a dark, dry place at 2-25 °C; tighten the bottle cap immediately after use.
- Shelf life (sealed product)
- 3 years
- Precautions
- Not for clinical use. Do not use if the powder is lumpy. After use, autoclave all contaminated materials at 121 °C for 30 minutes before disposal.
Composition
- Peptone
- 5.0 g/L
- Magnesium Sulfate
- 0.5 g/L
- Dipotassium Hydrogen Phosphate
- 1.0 g/L
- Glucose
- 20.0 g/L
- Yeast Extract Powder
- 2.0 g/L
- Agar
- 14.0 g/L
Features
Key features
- 01
Sterility testing of biologicals
Used for sterility testing of biological products to detect molds and yeasts.
- 02
High glucose
Contains 20.0 g/L glucose.
- 03
Simple formulation
Peptone, yeast extract, magnesium sulfate, phosphate and agar.
- 04
Three-year shelf life
Sealed product keeps for 3 years when stored dark and dry at 2-25 °C.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.