Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Mixed Material Embed Frits
Embedded frit assemblies combining a PEEK shell, stainless steel frit and PTFE sealing ring for HbA1c testing, online filtering and HPLC.
Key specifications
- Construction
- PEEK shell, stainless steel frit and PTFE sealing ring
- Alternative construction
- PEEK shell and stainless steel frit (no sealing ring)
- Application examples
- HbA1c test frits, online filtering, HPLC frits
- Compatibility example
- Can match the Arkray (Japan) HbA1c tester
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Mixed Material Embed Frits
Request a quoteOverview
Product overview
Mixed material embed frits combine more than two materials for specific analysis or filtration tasks. The assembly consists of a polyether ether ketone (PEEK) shell, a stainless steel frit and a polytetrafluoroethylene (PTFE) sealing ring, giving very good filtering effect; a version without the sealing ring uses only the PEEK shell and stainless steel frit.
Listed application examples are HbA1c test frits, online filtering and HPLC frits, and the frits can be matched with the Japanese Arkray HbA1c tester.
Specifications
Technical specifications
4 parameters
Construction
- Construction
- PEEK shell, stainless steel frit and PTFE sealing ring
- Alternative construction
- PEEK shell and stainless steel frit (no sealing ring)
Application
- Application examples
- HbA1c test frits, online filtering, HPLC frits
- Compatibility example
- Can match the Arkray (Japan) HbA1c tester
Features
Key features
- 01
Multi-material assembly
Combines PEEK, stainless steel and PTFE.
- 02
Sealing ring option
Available with a PTFE sealing ring or as PEEK shell plus stainless steel frit.
- 03
Matches HbA1c analyzers
Can match the Arkray HbA1c tester.
- 04
Online filtering and HPLC
Also listed for online filtering and HPLC frit use.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.