Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1054F / KL1054F
Motility Test Medium
Semi-solid tube medium for observing bacterial motility and for strain preservation, supplied as powder or granules.
Key specifications
- Product code (dehydrated powder)
- GF1054F
- Product code (granulated)
- KL1054F
- Form
- Dehydrated powder (GF) and granulated (KL) versions
- Quantity per litre of distilled or deionized water
- 22 g
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Motility Test Medium
Request a quoteOverview
Product overview
Motility Test Medium is a soft-agar medium built from peptone, beef extract and sodium chloride with only 4 g/L of agar. The low agar content keeps the gel semi-solid so that motile bacteria can spread away from the inoculation line, which is how the medium is used for motility observation. It is also listed for strain preservation.
Prepare it by dissolving 22 g in 1 L of distilled or deionized water with heating and stirring, dispense into test tubes and autoclave at 121 °C for 15 minutes. Let the tubes solidify in an upright position. The final pH is 7.4 ± 0.2.
Both a dehydrated powder (GF1054F) and a granulated version (KL1054F) are listed with identical composition. The product is not for clinical use.
Specifications
Technical specifications
13 parameters
Identification
- Product code (dehydrated powder)
- GF1054F
- Product code (granulated)
- KL1054F
- Form
- Dehydrated powder (GF) and granulated (KL) versions
Preparation
- Quantity per litre of distilled or deionized water
- 22 g
- Dissolution
- Heat with stirring until fully dissolved
- Dispensing and sterilisation
- Dispense into test tubes and autoclave at 121 °C for 15 minutes; allow to solidify vertically before use
- Final pH (25 °C)
- 7.4 ± 0.2
Storage
- Storage
- Store in a dark, dry place at room temperature; tighten the cap immediately after use
- Shelf life (sealed)
- 3 years
Composition
- Peptone
- 10.0 g/L
- Beef Extract Powder
- 3.0 g/L
- Sodium Chloride
- 5.0 g/L
- Agar
- 4.0 g/L
Features
Key features
- 01
Motility observation
Intended for observing bacterial motility, and also for strain preservation.
- 02
Semi-solid formulation
Peptone 10 g/L, beef extract powder 3 g/L, sodium chloride 5 g/L and agar 4 g/L.
- 03
Tube preparation
Dispensed into test tubes, autoclaved at 121 °C for 15 minutes and set vertically.
- 04
Long shelf life
Sealed product keeps for 3 years when stored dark and dry at room temperature.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.