Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Nutrient Agar (NA)
General-purpose agar for cultivating less fastidious microorganisms, offered in several published formulations as powder or granulated medium.
Key specifications
- Product code (powder, ISO-referenced formula)
- GF1318F
- Product code (powder, peptone 10 formula)
- GF1006F
- Product code (powder, agar 14 formula)
- GF631F
- Product code (granulated)
- KL1006F
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Nutrient Agar (NA)
Request a quoteOverview
Product overview
Nutrient Agar is a general-purpose solid medium. The GF1318F listing describes it as for the cultivation of non-fastidious microorganisms in food, water, feces and from clinical samples and cites ISO 21567, ISO 6579, ISO 10273 and ISO 11133; the other listings describe general cultivation of less fastidious microorganisms.
Several formulations are covered. GF1318F uses 23.0 g/L (meat extract 3.0, peptone 5.0, agar 15.0 g/L, pH 7.0 ± 0.2). GF1006F and KL1006F use 33.0 g/L (peptone 10.0, beef extract 3.0, sodium chloride 5.0, agar 15 g/L, pH 7.3 ± 0.2). GF631F uses 32.0 g/L with 14.0 g/L agar and pH 7.2 ± 0.2. All are boiled to dissolve, distributed and autoclaved at 121 °C for 15 minutes.
Sealed shelf life is 3 years for GF1318F and 5 years for the others. Not for clinical use.
Specifications
Technical specifications
22 parameters
Identification
- Product code (powder, ISO-referenced formula)
- GF1318F
- Product code (powder, peptone 10 formula)
- GF1006F
- Product code (powder, agar 14 formula)
- GF631F
- Product code (granulated)
- KL1006F
- Standards (ACC field)
- ISO 21567, ISO 6579, ISO 10273, ISO 11133 (GF1318F)
Preparation
- Quantity per litre of purified water (GF1318F)
- 23.0 g
- Quantity per litre of purified water (GF1006F, KL1006F)
- 33.0 g
- Quantity per litre of purified water (GF631F)
- 32.0 g
- Preparation
- Heat with frequent agitation and boil to dissolve completely; distribute and autoclave at 121 °C for 15 minutes
- Final pH (25 °C), GF1318F
- 7.0 ± 0.2
- Final pH (25 °C), GF1006F / KL1006F
- 7.3 ± 0.2
- Final pH (25 °C), GF631F
- 7.2 ± 0.2
Storage
- Storage
- Store in a dark, dry place at 2-25 °C; tighten the bottle cap immediately after use
- Shelf life (sealed)
- GF1318F: 3 years; GF1006F, GF631F, KL1006F: 5 years
Composition
- Meat extract (GF1318F)
- 3.0 g/L
- Peptone (GF1318F)
- 5.0 g/L
- Agar (GF1318F)
- 15.0 g/L
- Peptone (GF1006F, GF631F, KL1006F)
- 10.0 g/L
- Beef extract (GF1006F, GF631F, KL1006F)
- 3.0 g/L
- Sodium chloride (GF1006F, GF631F, KL1006F)
- 5.0 g/L
- Agar (GF1006F, KL1006F)
- 15 g/L
- Agar (GF631F)
- 14.0 g/L
Features
Key features
- 01
General cultivation
Used for the general cultivation of less fastidious microorganisms.
- 02
Food, water and clinical samples
The GF1318F listing names food, water, feces and clinical samples as sources.
- 03
Choice of formulation
23.0 g/L (GF1318F), 33.0 g/L (GF1006F, KL1006F) or 32.0 g/L (GF631F).
- 04
Standard autoclave cycle
121 °C for 15 minutes for all listings.
- 05
Powder or granulated
Dehydrated powder codes plus the granulated code KL1006F.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.