Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1093F / GF1082F
Potato Dextrose Agar (PDA)
Potato-based agar for isolating, counting and cultivating yeasts and molds, offered as a general grade with chloramphenicol and a pharmacopoeia grade (CP/EP/USP) for pharmaceutical test samples.
Key specifications
- Product code, general grade (dehydrated powder)
- GF1093F
- Product code, general grade (granulated)
- KL1093F
- Product code, pharmacopoeia grade (dehydrated powder)
- GF1082F / GF608F
- Product code, pharmacopoeia grade (granulated)
- KL1082F
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Potato Dextrose Agar (PDA)
Request a quoteOverview
Product overview
Potato Dextrose Agar is a potato and dextrose medium for the enumeration, isolation and cultivation of molds and yeasts. Two grades are published. The general grade (GF1093F dehydrated, KL1093F granulated) contains peeled potatoes 300 g/L, dextrose 20 g/L, agar 15 g/L and chloramphenicol 0.1 g/L, and is prepared at 40.1 g per litre.
The pharmacopoeia grade (GF1082F and GF608F dehydrated, KL1082F granulated) is stated for the cultivation of yeasts and molds in test samples for the pharmaceutical industry (CP/EP/USP). It is prepared at 40.0 g per litre of purified water from 200 g/L peeled potato, 20.0 g/L dextrose and 14.0 g/L agar, with a final pH of 5.6±0.2 and storage at 2-25 °C. All versions are autoclaved at 121 °C for 15 minutes.
Specifications
Technical specifications
20 parameters
Product
- Product code, general grade (dehydrated powder)
- GF1093F
- Product code, general grade (granulated)
- KL1093F
- Product code, pharmacopoeia grade (dehydrated powder)
- GF1082F / GF608F
- Product code, pharmacopoeia grade (granulated)
- KL1082F
- Form
- Dehydrated powder and granulated forms
- Pharmacopoeia reference (pharmacopoeia grade)
- CP / EP / USP
Preparation
- Preparation (general grade)
- Weigh 40.1 g into 1 L of distilled or deionized water, stir and heat to boiling until dissolved; divide into Erlenmeyer bottles and sterilize at 121 °C for 15 min.
- Preparation (pharmacopoeia grade)
- Suspend 40.0 g in 1 L of purified water; heat with frequent agitation to dissolve; distribute and autoclave at 121 °C for 15 min.
- Final pH (pharmacopoeia grade, 25 °C)
- 5.6±0.2
Storage
- Storage (general grade)
- Store in a dry place away from light; tighten the cap immediately after use.
- Storage (pharmacopoeia grade)
- Store in a dark and dry place at 2-25 °C; tighten the bottle cap immediately after use.
- Shelf life, sealed (dehydrated powder, both grades)
- 5 years
- Shelf life, sealed (granulated, both grades)
- 3 years
Composition (general grade)
- Potatoes (peeled)
- 300 g/L
- Dextrose
- 20 g/L
- Agar
- 15 g/L
- Chloramphenicol
- 0.1 g/L
Composition (pharmacopoeia grade)
- Potato (peeled)
- 200.0 g/L
- Dextrose
- 20.0 g/L
- Agar
- 14.0 g/L
Features
Key features
- 01
Yeast and mold enumeration
General grade is used for enumeration, isolation and cultivation of molds and yeasts.
- 02
Pharmacopoeia-referenced grade
GF1082F, GF608F and KL1082F are stated for yeast and mold cultivation in pharmaceutical test samples (CP/EP/USP).
- 03
Chloramphenicol in general grade
The general-grade formulation includes 0.1 g/L chloramphenicol.
- 04
Powder and granulated forms
Dehydrated powder (5-year shelf life) and granulated (3-year shelf life).
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.