Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1067F
Saline Peptone Water (Maximum Recovery Diluent)
Diluent made from peptone and sodium chloride for preparing dilution solutions of microbiological samples.
Key specifications
- Product code (dehydrated powder)
- GF1067F
- Form
- Dehydrated powder
- Quantity per litre of purified water
- 9.5 g
- Preparation
- Heat with frequent agitation and boil to dissolve completely; distribute and autoclave at 121 °C for 20 minutes
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Saline Peptone Water (Maximum Recovery Diluent)
Request a quoteOverview
Product overview
Saline Peptone Water, also called Maximum Recovery Diluent, is used for preparing dilution solutions of microbiological samples. It contains only 1.0 g/L peptone and 8.5 g/L sodium chloride.
Suspend 9.5 g in 1 L of purified water, boil with frequent agitation until dissolved, then distribute and autoclave at 121 °C for 20 minutes. The final pH is 7.0 ± 0.2.
Sealed shelf life is 5 years, stored in a dark, dry place at 2-25 °C with the bottle cap tightened after use. The product is not for clinical use.
Specifications
Technical specifications
9 parameters
Identification
- Product code (dehydrated powder)
- GF1067F
- Form
- Dehydrated powder
Preparation
- Quantity per litre of purified water
- 9.5 g
- Preparation
- Heat with frequent agitation and boil to dissolve completely; distribute and autoclave at 121 °C for 20 minutes
- Final pH (25 °C)
- 7.0 ± 0.2
Storage
- Storage
- Store in a dark, dry place at 2-25 °C; tighten the bottle cap immediately after use
- Shelf life (sealed)
- 5 years
Composition
- Peptone
- 1.0 g/L
- Sodium chloride
- 8.5 g/L
Features
Key features
- 01
Sample dilution
Used for the preparation of dilution solutions for microbiological samples.
- 02
Minimal formula
Peptone 1.0 and sodium chloride 8.5 g/L.
- 03
Sterilisation
Autoclave at 121 °C for 20 minutes.
- 04
Shelf life
5 years sealed.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.