Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Sampling Bags with Flat Wire
Sterile polyethylene sampling bags with a flat-wire closure, pull-tab opening and a writing area, in 120, 650 and 1800 mL sizes.
Key specifications
- BCWCB022F
- 76×178 mm, 120 mL; 100 pcs/pack
- BCWCB023F
- 140×229 mm, 650 mL; 100 pcs/pack
- BCWCB009F
- 178×305 mm, 1800 mL; 50 pcs/pack
- Sterilization
- EO (ethylene oxide)
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Sampling Bags with Flat Wire
Request a quoteOverview
Product overview
These wire sterile sampling bags are used to collect samples and keep them sterile in medical, food and environmental-monitoring work, including bacterial, fungal, viral and other microbial samples. The design protects the sterility and integrity of the sample for later experiments and testing.
The bag is made of virgin polyethylene that is transparent, flexible and free of contamination. Pull-tabs on both sides allow opening without touching the contents, an independent pre-tear sealing line keeps the bag sterile before use, and the wire seal overlaps more than three times to limit leakage in transport. There are no side seals, and an optional writing area supports labelling.
Specifications
Technical specifications
7 parameters
Ordering
- BCWCB022F
- 76×178 mm, 120 mL; 100 pcs/pack
- BCWCB023F
- 140×229 mm, 650 mL; 100 pcs/pack
- BCWCB009F
- 178×305 mm, 1800 mL; 50 pcs/pack
- Sterilization
- EO (ethylene oxide)
Material
- Material
- Virgin polyethylene composite material with wire sealing
Features
- Closure
- Flat wire, overlapping more than three times
- Opening
- Pull-tab on both sides; independent pre-tear sealing line; no side seals
Features
Key features
- 01
Pull-tab opening
Pull-tabs on both sides allow opening without contaminating the sample.
- 02
Wire sealing
The seal overlaps more than three times to prevent leakage and ease transport.
- 03
Pre-tear sealing line
An independent line keeps the bag sterile and secure before use.
- 04
Leak-proof, no side seals
Optional writing area for clear labelling.
- 05
Three sizes
120 mL, 650 mL and 1800 mL.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.