Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1034F / KL1034F
Selenite Cystine Broth
Selective enrichment broth for the isolation of Salmonella spp., available as dehydrated powder or granulated medium.
Key specifications
- Product code (dehydrated powder)
- GF1034F
- Product code (granulated)
- KL1034F
- Form
- Dehydrated powder (GF) and granulated (KL) versions
- Quantity per litre of distilled or deionized water
- 23.0 g
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Selenite Cystine Broth
Request a quoteOverview
Product overview
Selenite Cystine Broth is a selective enrichment medium for isolating Salmonella spp. Its formula combines peptone and lactose with 4 g/L sodium selenite, a phosphate buffer and a trace of L-cystine.
To prepare it, suspend 23.0 g in 1 L of distilled or deionized water, then heat with frequent agitation and boil until the powder dissolves. The medium must not be autoclaved; dispense it into conical flasks and use it right after it cools to room temperature. The final pH is 7.0 ± 0.2.
Unused sealed product should be stored at 2-8 °C, dry and protected from light. The source advises wearing a mask when weighing to avoid dust irritation, and states the product is not for clinical use.
Specifications
Technical specifications
14 parameters
Identification
- Product code (dehydrated powder)
- GF1034F
- Product code (granulated)
- KL1034F
- Form
- Dehydrated powder (GF) and granulated (KL) versions
Preparation
- Quantity per litre of distilled or deionized water
- 23.0 g
- Dissolution
- Heat with frequent agitation and boil to dissolve completely
- Sterilisation
- Do not autoclave; dispense into conical flasks and use immediately after cooling to room temperature
- Final pH (25 °C)
- 7.0 ± 0.2
Storage
- Storage
- Store at 2-8 °C in a dry place away from light; tighten the cap immediately after use
- Shelf life (sealed)
- 3 years
Composition
- Peptone
- 5 g/L
- Lactose
- 4 g/L
- Sodium Selenite
- 4 g/L
- Disodium Hydrogen Phosphate
- 10 g/L
- L-Cystine
- 0.01 g/L
Features
Key features
- 01
Salmonella enrichment
A selective enrichment broth for the isolation of Salmonella spp.
- 02
No autoclaving
The medium is boiled to dissolve, never autoclaved, and used immediately after cooling.
- 03
Defined formula
Peptone 5, lactose 4, sodium selenite 4, disodium hydrogen phosphate 10 and L-cystine 0.01 g/L.
- 04
Cold storage
Store sealed product at 2-8 °C in a dry place away from light; shelf life 3 years.
- 05
Handling note
Wear a mask when weighing the powder to avoid respiratory discomfort from dust.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.