Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: GF1088AF
Shigella Chromogenic Agar
Chromogenic agar for the selective isolation and preliminary identification of Shigella, prepared by boiling 52.1 g of powder in 970 mL of purified water.
Key specifications
- Product code
- GF1088AF
- Form
- Dehydrated powder
- Preparation
- Suspend 52.1 g in 970 mL of purified water; heat with frequent agitation and boil to dissolve, then cool to about 50 °C; do not overheat or autoclave.
- Final pH (25 °C)
- 6.8±0.2
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Shigella Chromogenic Agar
Request a quoteOverview
Product overview
Shigella Chromogenic Agar is intended for the selective isolation and preliminary identification of Shigella. The formulation combines peptone, yeast extract, a carbohydrate, an antibacterial agent, phenol red and mixed colorants in an agar base with a final pH of 6.8±0.2.
To prepare, suspend 52.1 g of powder in 970 mL of purified water, boil with frequent agitation until dissolved and allow to cool to about 50 °C. The medium must not be overheated or autoclaved. Sealed product has a shelf life of 3 years when stored in a dark place at room temperature.
For research use only; not for clinical use.
Specifications
Technical specifications
14 parameters
Product
- Product code
- GF1088AF
- Form
- Dehydrated powder
Preparation
- Preparation
- Suspend 52.1 g in 970 mL of purified water; heat with frequent agitation and boil to dissolve, then cool to about 50 °C; do not overheat or autoclave.
- Final pH (25 °C)
- 6.8±0.2
Storage
- Storage
- Store in a dark place at room temperature before use.
- Shelf life (sealed)
- 3 years
Composition
- Peptone
- 9.0 g/L
- Yeast extract powder
- 3.0 g/L
- Sodium chloride (NaCl)
- 5.0 g/L
- Carbohydrate
- 15.0 g/L
- Agar
- 15 g/L
- Antibacterial agent
- 2.0 g/L
- Phenol red
- 0.1 g/L
- Mixed colorants
- 2.1 g/L
Features
Key features
- 01
Selective isolation
Contains an antibacterial agent (2.0 g/L) as part of its selective formulation.
- 02
Preliminary identification
Phenol red and mixed colorants are included in the formulation for preliminary identification.
- 03
Boil-only preparation
52.1 g in 970 mL of purified water; do not overheat or autoclave.
- 04
3-year shelf life
Sealed product stored in the dark at room temperature has a 3-year shelf life.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.