Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: V4-T / V4-TL / V4-A / V4-AL
Snap-Top Vials (11 mm)
11 mm snap-top 2.0 mL autosampler vials in USP Type 1 borosilicate glass with caps that are applied and removed by hand, clear or amber.
Key specifications
- Material
- USP Type 1 borosilicate glass
- Capacity
- 2.0 mL
- Recommended fill
- 1.5 mL
- Dimensions (O.D. x L)
- 11.6 x 32 mm
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
Snap-Top Vials (11 mm)
Request a quoteOverview
Product overview
11 mm Snap-Top Vials seal well enough to minimise evaporation, even with volatile samples. Compared with crimp-top vials they are more convenient, because the caps can be applied and removed by hand. An audible click confirms that a secure seal has formed and the cap is correctly aligned.
The vials can be closed with either snap caps or crimp caps. Each vial is 2.0 mL (recommended fill 1.5 mL), 11.6 x 32 mm, flat bottom, in clear or amber glass with or without a write-on spot. Snap caps come in natural, blue and red with a 6 mm hole, plain or with PTFE/silicone septa. Items are packed 100 per box.
Specifications
Technical specifications
11 parameters
General
- Material
- USP Type 1 borosilicate glass
- Capacity
- 2.0 mL
- Recommended fill
- 1.5 mL
- Dimensions (O.D. x L)
- 11.6 x 32 mm
- Opening
- 11 mm snap-top
- Bottom style
- Flat bottom
- Closure options
- Snap caps or crimp caps
- Pack quantity
- 100 pcs/box
Vials
- Catalog numbers
- V4-T (clear), V4-TL (clear, write-on spot), V4-A (amber), V4-AL (amber, write-on spot)
Caps and septa
- Snap caps
- C4-1 (natural), C4-2 (blue), C4-3 (red); 6 mm hole
- Snap caps with septa
- SC4-1 to SC4-10: natural, blue or red caps with PTFE/silicone septa (including pre-slit), 6 mm hole
Features
Key features
- 01
Low evaporation
Good sealing minimises evaporation, even with volatile samples.
- 02
Tool-free capping
Caps are applied and removed by hand, unlike crimp-top vials.
- 03
Audible click
A click confirms a secure seal and correct cap alignment.
- 04
Snap or crimp caps
The vial can be capped with either snap caps or crimp caps.
- 05
Colour-coded caps
Natural, blue and red snap caps with 6 mm hole, with or without PTFE/silicone septa.
- 06
Clear or amber
Available clear or amber, with or without a write-on spot.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.