Copure SPE (HLB family)
Biocomma Copure HLB: PS/DVB copolymer, pH 0–14, 500–750 m²/g, 200–400 Å, cartridges from 30 mg/1 mL to 500 mg/12 mL.
View product
Reference: MY096-PTFE-45 / MY096-PTFE-22
SpinFlow® ONE Series Integrated 96-Well Micro-Filter Plates
SpinFlow® ONE series integrated 96-well PTFE micro-filter plates molded in one piece of polypropylene, with high centrifugal force tolerance and low non-specific binding for biochemical screening.
Key specifications
- Format
- 96-well integrated plate (filter plate and membrane, no flow plate)
- Plate material
- Polypropylene, single injection molding
- Membrane
- PTFE (hydrophobic and hydrophilic)
- Pore sizes
- 0.22 and 0.45 µm
- Configured to your application by our specialists
- Installed and commissioned on site
- Training and after-sales support across Jordan, the GCC and MENA
SpinFlow® ONE Series Integrated 96-Well Micro-Filter Plates
Request a quoteOverview
Product overview
The SpinFlow® ONE series integrated micro-filter plates consist of a filter plate and membrane only, with no flow plate. The filter plate is formed in a single injection of polypropylene and combined with PTFE filter membranes.
This construction allows greater centrifugal force tolerance, reduces non-specific binding and lowers interference, which makes the plates particularly suitable for biochemical screening analyses. Hydrophobic and hydrophilic PTFE membranes are offered at 0.22 and 0.45 µm, including sterile versions, packed 10 plates per box.
Specifications
Technical specifications
7 parameters
Plate
- Format
- 96-well integrated plate (filter plate and membrane, no flow plate)
- Plate material
- Polypropylene, single injection molding
- Membrane
- PTFE (hydrophobic and hydrophilic)
- Pore sizes
- 0.22 and 0.45 µm
Ordering
- Catalog numbers
- MY096-PTFE-45, MY096-PTFE-45-S, MY096-PTFE-22, MY096-PTFE-22-S, MY096-PTFE-H-22, MY096-PTFE-H-22-S, MY096-PTFE-H-45, MY096-PTFE-H-45-S
- Sterile versions
- Catalog numbers ending in -S
- Packaging
- 10 pieces/box
Features
Key features
- 01
One-piece polypropylene plate
Single-injection molded filter plate without a flow plate.
- 02
Higher centrifugal tolerance
Greater centrifugal force tolerance.
- 03
Low non-specific binding
Reduces non-specific binding and interference.
- 04
Biochemical screening
Particularly suitable for biochemical screening analyses.
- 05
PTFE membrane options
Hydrophobic and hydrophilic PTFE at 0.22 and 0.45 µm, with sterile versions.
From order to operation
We stay with the instrument after it arrives
Al-Shaker specifies the configuration, documents the system, and supports it across Jordan, the GCC, and MENA.
- 01
Consult
- 02
Plan
- 03
Supply
- 04
Install
- 05
Train
- 06
Support
Keep exploring
More from Biocomma
Copure QuEChERS
Biocomma Copure QuEChERS: EN 15662, AOAC 2007, and Original salts in 50 mL tubes — AOAC 6 g MgSO4 + 1.5 g NaOAc; EN 4 g MgSO4 + 1 g NaCl + citrates.
View product
CommaSil HPLC columns
Biocomma CommaSil fully porous silica HPLC: 3 / 3.5 / 5 μm particles, 2.1 / 3.0 / 4.6 mm IDs, lengths 30–250 mm.
View product
Syringe filters
Biocomma syringe filters: nylon, PTFE, PVDF, and PES membranes in a polypropylene housing, 0.22 μm versus 0.45 μm, optional gamma-sterile.
View product
Talk to the technical team
Tell us the application. We will specify the system.
Share the workflow, capacity, and compliance constraints. We respond with a recommended configuration, not a generic catalogue list.